morse reamer for sale, brand-new and used.

NOS,Unused, 15/16 tapered Spiral flute bridge reamer. No.3 Morse taper.High Speed SteelFits into pneumatic air vane(reamer) or you can weld a nut on the end and use a impact gun new old stock, unused some have spots of surface rust

This is a 2 25/32 inch (2.781 inch) (2.781") straight fluted chucking reamer. The brand appears to be ISI USA, but I am not sure. Please see the closeup photo for the logo.

1-5/16" spiral flute reamer  Made by Cleveland Twist Drill Co 

1-1/2" straight Flute HSS reamer with MT4 shank Made by LSI in the USA

Nice 1-1/4 " reamer for sale. Straight flutes and made from HSS (high speed steel)  Brand is National

Reamer is in very good condition. Only used to remove burrs from drill press spindle. You can see marks on taper where it was chucked up but can't feel them with your fingernail, Very nice American made reamer.

Union Butterfield 4532 High-Speed Steel Expansion Chucking Reamer, Straight Flute, Morse Taper Shank, Uncoated (Bright), 11/16 inch Expandable as wear decreases its cutting diameter, so it can be reground and re-sharpened to its original dimensions for increased life Morse taper shank for accurate alignment and firm hold in the socket of a toolholder Straight flute for general-purpose reaming of uninterrupted cuts in through holes and blind holes Uncoated (bright) tools have no

Pratt and Whitney jig bore taper reamer set 2" to 3/8" No 4 morse sizes 2", 1-3/4", 1-1/2", 1-3/8", 1-1/4", 1-1/8" No 3 morse 1", 7/8", 3/4" No. 2 morse 5/8", No. 1 morse 1/2", 7/16", 1/2"

Another Fine Auction from high-bid77 Morse Taper Reamer Set - MT1, MT2, MT3, MT4, MT5 Nice seet of morse taper - MT- reamers in wood box. Made by the Alvord - Polk Tool Company of Millersburg PA. Set has MT1, MT2, MT3, MT4 & MT5 reamers.

TO

9-1/2" Overall 6 Flute Made in U.S.A.

7" Overall 8 Flute

Nice Vintage High Speed #498 Morse Taper Finishing Reamer MORSE Made In New Bedford Mass. USA 498 HIGH SPEED Measures 6” in length Has (8) 3” Flutes Very good used condition. Please review all photos for exact condition.

DISCLAIMER I KNOW NOTHING ABOUT MACHINE SHOP TOOLS.THE INFORMATION BELOW IS PRINTED ON THE BITS.AS FAR AS LENGTH OF CUT AND OVERALL LENGTH OF THE BITS, THE MEASUREMENTS ARE MY OWN ESTIMATES.

NEW MORSE 1.2547 HSS MORSE TAPER SHANK REAMER 14" LONG. LOOK CLOSELY THE END OF THE REAMER IS PILOTED AT 1.214 AND REAMER IS 1.2547. # 4 MORSE TAPER SHANK PERFECT CONDITION NEW NEVER USED CONDITION.

MT2 Morse Taper Reamer Set USSR. Made in USSR, quality tool, from storage keeping. Price is for set of two reamers.