morse reamer for sale, brand-new and used.

This auction is for one precision made #1 Morse Taper (MT1) 3/16" ( 0.1875 inch) 6 flute Cleveland reamer 931263 USA made for your lathe or drill press with a Morse Taper #1 or other sizes using appropriate adapters. [See my other auctions if you need a MT1-MT2 adapter]. Maximize your accuracy and performance with this high quality USA made reamer for lathes and drill presses set up with a MT tapered bore.

This auction is for one precision made #1 Morse Taper (MT1) 5/16" ( 0.3125 inch) 6 flute Cleveland reamer 907095 USA made for your lathe or drill press with a Morse Taper #1 or other sizes using appropriate adapters. [See my other auctions if you need a MT1-MT2 adapter]. Maximize your accuracy and performance with this high quality USA made reamer for lathes and drill presses set up with a MT tapered bore.

You are buying one new old stock Morse #9 Spiral Flute Taper Pin Reamer. Made in the USA. The plastic case is pretty dirty but the reamer is new.

LISTING IS FOR A LIGHTLY USED MORSE TAPER FINISHING RE

I HAVE A 7/8'' MORSE STRAIGHT HAND REAMER. IT IS 9 3/4'' OVERALL 5'' LENGTH OF CUT. THANK YOU FOR YOUR INTEREST

PAIR OF BUTTERFIELD .910"x1.281" MORSE TAPER #3 SPIRAL TAPERED REAMER HSY 852 TD-843 IN MINT CONDITION. THEY APPEAR TO HAVE NEVER BEEN USED BUT WERE STORED IN WORKING SHOP SO HAVE BEEN MOVED AROUND. THERE IS NO DAMAGE TO EDGES & FEEL VERY SHARP.

This is a large adjustable reamer. #5 morse taper shank. This is used and a little dirty but in usable condition.

Thank You For Looking At Our Products Product Information:Cleveland Adjustable Blade Shell Reamer Product Features & Specifications:1-7/8" Blade Diameter1-7/8" Blade Length

New Old Stock Precision Drill and Reamer #3 Morse Taper 4 Fluted Reamer or Deep Hole Drill no. 91250 # 86-400-2241 HSS Solid Carbide Tipped 14 3/8" Overall 5/8" 2.4 Pounds Actual 3 pounds shipped.

var itemNumber = window.ebayItemID ?

Morse 1" pipe tap reamer. Shows little to no use. Ream your hole befor tapping to save your part and your tap.

Morse pipe reamer 1-1/4" in the original box. It looks new and unused but has some surface rust spots on it. Poorly stored.

Counterbore, reamer and tap made in U.S.A. Drills made in BRAZIL. MORSE TAPER.

For Sale - - Never used Morse 1 1/4" reamer - #4 taper - New from surplus inventory Any questions please ask. Thanks for looking.

New #4 Morse taper finishing reamer. Great for cleaning out your tail stock socket. Lists for $190.

RTS M-2 p 2511 10, "I AM NOT A MACHINIST" This bit was coated with some sticky stuff, and purchased for TRW drive equipment before closed up. I measured what I could and I am leaning towards this for measurements and info needed. High carbon steel.

Hi, All, here are 5, what I think are reamers for a machinist lathe or mill. All show wear, but are useable/resharpable/repurposale. 2 are morse tapered, 2 are straight tapered, last is a tap holder(tap can be removed, no markers mark)

This is a Morse 2490 reamer cut is used. Posted with eBay Mobile

Unknown name of manufacturing company but, matches specifics of a Morse taper #2 20mm / 228mm length TTC metric straight flute chucking reamer. Retails for $78.22 new. Again.