morse reamer for sale, brand-new and used.

Union Butterfield 4532 High-Speed Steel Expansion Chucking Reamer, Straight Flute, Morse Taper Shank, Uncoated (Bright), 1-1/8 inch

Union Butterfield 4537 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Taper Shank, Uncoated (Bright), 5/8 inch

Used Kennametal Erickson Adjustable Floating Reamer 2-72-152-001.Range 1" to 1.5"Overall length 6"#2 Morse Taper Shank.In good condition.

Taper pin machine reamer size #10. Diameter measures 0.57 and tapers to 0.72, flute length 7". Overall length is 11 1/2 ", flute length 7 3/4 ".

This sale is for one Never used MORSE Cutting Tools USA List No. 1701 - Bridge Reamer; 1-5/16" max. Dia, 1" Point Dia; 7-3/8" Flute Length; 11-3/4" OAL; Reduced Shank 5/8"; HSS; Never used in the package, List $315.00.

NOS,Unused, 15/16 tapered Spiral flute bridge reamer. No.3 Morse taper.High Speed SteelFits into pneumatic air vane(reamer) or you can weld a nut on the end and use a impact gun new old stock, unused some have spots of surface rust

This is a 2 25/32 inch (2.781 inch) (2.781") straight fluted chucking reamer. The brand appears to be ISI USA, but I am not sure. Please see the closeup photo for the logo.

1-5/16" spiral flute reamer  Made by Cleveland Twist Drill Co 

1-1/2" straight Flute HSS reamer with MT4 shank Made by LSI in the USA

Nice 1-1/4 " reamer for sale. Straight flutes and made from HSS (high speed steel)  Brand is National

Reamer is in very good condition. Only used to remove burrs from drill press spindle. You can see marks on taper where it was chucked up but can't feel them with your fingernail, Very nice American made reamer.

Union Butterfield 4532 High-Speed Steel Expansion Chucking Reamer, Straight Flute, Morse Taper Shank, Uncoated (Bright), 11/16 inch Expandable as wear decreases its cutting diameter, so it can be reground and re-sharpened to its original dimensions for increased life Morse taper shank for accurate alignment and firm hold in the socket of a toolholder Straight flute for general-purpose reaming of uninterrupted cuts in through holes and blind holes Uncoated (bright) tools have no

UP TO 6 METCUT SUBLAND 2 FLUTE 9/16" #2 MORSE TAPER SHANK STEP DRILLS This is For Up to 6 New Premium Metcut 2 Flute Extra Length Subland 9/16"(.562") diameter High Speed Taper Shank Step Drill, No.T-19334. Each Bid is for ONE Drill.