motor keyway for sale, brand-new and used.

[ Gast 16AM-FRV-252 9 HP 275 CFM 2000 RPM C-Face Air Motor

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Small Gas Engine / Motor with a 1/2" Shaft with a 3/16" Keyway slot Length is 3"

Pulley / Sheave Reducer Sleeve to reduce a 5/8" Bore Pulley sprocket wheel to fit a Motor with a 9/16" Shaft with a 3/16"

Description : The complete self-contained, battery-powered DL3000 is easy to install because it uses the same door prep (mounting holes) as most standard cylindrical knob sets. It can be used as a keyed or keyless lock system, with master key and unique master code capabilities.

TB Woods Type SDS SDS34 Sure-Grip Bushing, Cast Iron, Inch, 0.75" Bore, 2.1875" OD, 1.31" Length, 5000 lbs/in Torque, Standard Design, Standard Keyway

Martin 5016 Roller Chain Coupling, Sintered Steel, Inch, 16 Teeth, 1 1/4" Bore, 3 25/32" OD, 1 7/16" Length, 4000 rpm Max Rotational Speed, 1/4" x 1/8" Keyway This Martin hub is one of two simplex sprockets used in a roller chain coupler for joining and transmitting power to two perpendicular shafts. It is made of sintered steel for strength and hardness and has hardened teeth for resistance to wear and fatigue.

Martin 4016 Roller Chain Coupling, Sintered Steel, Inch, 16 Teeth, 1" Bore, 3 1/32" OD, 1 1/8" Length, 5000 rpm Max Rotational Speed, 1/4" x 1/8" Keyway

Baldor EM2559T-4 Super-E Premium Efficiency Motor, 125 HP, 1775 RPM, 460 Volt, Open Drip Proof (OPSB), 405T Frame, New in Box. The motor was drilled and tapped to install an Aegis External Shaft Grounding Kit and was installed but it has never been run. (The customer needed a part winding start motor; this motor is NOT a part winding start motor.) There is a slight mark on the keyway where the set screw was put in but again, this motor was never powered up.