motor mounting plate for sale, brand-new and used.

New York Supplies New York Supplies Yellow Process

New York Supplies New York Supplies Magenta Proces

New York Supplies New York Supplies Cyan Process f

New York Supplies New York Supplies

New York Supplies New York Supplies Yellow Ink for Offse

NuTone 0695B000 Motor Assembly for QT80 Series Fans Fast and Free shipping, Return : UPS pickup not charge Product Description Genuine NuTone Motor Assembly 0695B000 includes the Motor, blower wheel and mounting bracket. The 0695B000 is the Genuine replacement motor assembly for all the QT80 series fans. This includes both the A and B units.

This is for a vintage Bonis Bros. Co. Fur/Leather sewing machine.

Dunkermotoren Brushless DC Motor Type BG62X6024vdc, 3380rpm6,44A ; 93A with Type PLG52 Planetary Gearboxwith approx. 30mm timing gear Stainless Steel housing, rectangular mounting plate

New York Supplies New York Supplies Photocell Red Eye (IR) RL2 Electronic Sheet Sensor – Front Lay Sensor For Heidelberg MO SM-72 SM-102 S-Offset SORM

New York Supplies New York Supplies Magnet&nbs

New York Supplies New York Supplies

You are buying Qty. (1) USED Minarik Corporation - Motor Controller Model RG500UA -Unable to fully test the motor controller at my facility. Upon visible inspection everything seems to be in good condition.

New old stock no box Landis & Gyr Damper Motor. No.3 Damper A Mounting Style: front Model: 331-4310 Extended shaft No. 331-4311 Nominal Spring Range: 3 - 7 psi Mounting Plate dimension: 10-1/2"L x 3"W Comes with hardware and installation instructions.

THIS MOTOR WAS TAKEN OFF A MACHINE NO LONGER IN SERVICE AND IS IN ECELLENT CONDITION. WHILE ON THE MACHINE WE NEVER DID USE ITS FUNCTION SO THE MOTOR HAS NEVER BEEN RAN WHILE INSTALLED. Leeson Motors Gearmotor-Right-Angle Shaft, 29RPM, 1/6HP, TEFC, 115/230V, AC Product Specifications HORSEPOWER1/6 RPM29 TORQUE IN LBS110 FRAME38 TYPE-FRAME13F60-38F ENCLOSURETEFC AMP2 PHASE1 VOLTAGE115 / 230 OVERHUNG LOAD LBS.235 SHAFT ORIENTATION

Merkel Korff 12VDC Gear Motor 11:1 Ratio(11 turns of motor for one turn of output shaft 2-inch or 50.5mm Outer Diameter x 3-3/4" Long, 1/4" Flatted Shaft x 1 Inch Long 1.5" spaced Threaded Mounting holes on face plate 4-Wire part Numbers CYHC-42866-115-1,,,,, DS1674B,,,,, 08106 Merkle-Korff CYHC-42866-115-1 Does not apply Buyer Will Receive Item As Pictured Buy it Now from a Trusted seller. About Us

12 volt D.C. MOTOR permanent magnet powerful magnets You are bidding on one 3 hp electric motor - 3 hp at 13.6 VOLT D.C.

No. 8007 Tork Time Program SwitchTime Clock with Omitting Device New Old Stock Note: At time of listing I had two of these items...This sale is for one with option to purchase second one if still available. Both are identical .

for sale a VINTAGE LEWACO Motor holder basse straps motor mount NIP lewaco - lemmerman-walstedt co. st cloud Minnesota steel stamping base plate with 3.25" x 5" bolt pattern comes with two straps and screws \for mounting 6" diameter motor. as shown.

WE BUY OBSOLETE AND EXCESS INVENTORY! This is a used Centrifugal Squirrel Cage Blower, with a Dayton Motor. This unit features 3 blades with a filter in the housing that is 12" in diameter x 4 1/4" deep.

This is a strong running Dual shaft electric motor from a used Sears Craftsman 12" Wood Lathe Model # 113.23801 Some dust and dirt wear and tear but in good working condition.. 1/2 Horsepower single phase 1725 RPM 120 Volt 7.5 amp 60 cycle. Has a 5/8" diameter shaft flat with key slot & Key about 2" long overall on right side as you face the nameplate.