nema 5-50 for sale, brand-new and used.

NEW, WESTINGHOUSE, AC MAGNETIC STARTER, A200S0CAC, NEW IN BOX, NOS

Product Description Combination Motor Starter, Circuit Breaker, Short Circuit Protection 30A, NEMA Size 0, Coil Volts 120, Hz 50/60, Amps AC 18, NEMA Enclosure Type 1, 3 HP @ 3 Phase - 230V, 5 HP @ 3 Phase - 460V, Auxiliary Contact Form -, Fuse Clip Type Class H NEMA Combination Motor Starters and AccessoriesMotor starter disconnect switch

Product Description Magnetic Motor Starter, Non Reversing, NEMA Size 1, NEMA Type 1, Number Of Poles 2, Power Rating @ 120 VAC Single Phase 2 HP, Power Rating @ 230 VAC Single Phase 3 HP, Length 10 Inches, Height 5.56 Inches, Width 6 Inches, 240 VAC Coil, One Thermal Unit Required Sold Separately NEMA Magnetic Motor Starters with Standard Overload RelaysFull-voltage s

New In Box, Square D 8536SC03V02S Motor Starter, NEMA Size 1, Coil 120Vac, 32Amps, 3-Pole, 600V, 200/230V, 60Hz, 7-1/2Hp/ 5.6kW; 460/575V, 60Hz, 10Hp/ 7.5kW; Coil Rating: 110-120V 50/60Hz. Item is New, unused SELLER'S PAYMENT INSTRUCTIONS, SHIPPING AND RETURN POLICY (sorry - long but necessary): BY BIDDING ON THIS ITEM, YOU ARE ENTERING A PURCHASE AGREEMENT WITH THE FOLLOWING TERMS AND CONDITIONS:

Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. This is for a new magnetic motor starter designed to run air compressors or pumps or any machine that automatically runs based on it's settings.

Square D Reversing contactors Class 8702 3-pole 3-phase reversing magnetic contactors are used for starting, stopping and reversing a.c. motors where overload protection is separately provided.

Shipping Payment

Shipping Payment

Reversing Starter This is an expensive starter that can be bought reasonable. Although it says we will not ship we will load this on a carrier of your choice for no additional charges. FOB Clarksville, TN.

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

NEW 2 phase Bi-PoLar stepper motor controller Micro step max 12800 step per rev High performance 7.8A 80V Stepping motor driver Key Features H-Br

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

The items are USED and sold AS-IS, but were removed from service in a working condition. Below are the detail from the manufacturers page and I believe all products are current. Stepper Motor The HT34-490 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications.

MICROSTEPPING VDC/ LEADSHINE DRIVER 3-PHASE 50 8.3A 5.9A) (RMS 3ND583

DRIVER 8.3A 3ND583 5.9A) LEADSHINE MICROSTEPPING (RMS 50 VDC/ 3-PHASE

template_preview

Leadshine NEMA34 86mm 571ozin 4.0NM 20-50VDC 2phase Stepper motor DSP Closed-Loop Drive kits 86HS40-EC-1000+HBS806 HBS86+86HS40-EC-1000 Hybrid Servo Drive HBS86 Descriptions The HBS series offers an alternative for applicati

110HS20 Leadshine 2 phase stepper motor 110HS 20NM 1.8 degree 6.5A original New