Description[ 1/8" MPT X 3/8"-27 ] [ ROTATION OFF/ON] [STEM POSITION DOWN] [STEM SIZE .240"] [CTR INLET TO END OF STEM 2"] [ANGLE - 90], [ COMES WITH #72 ORIFICE ] NOV.2005 STYLE CHANGE, WAS KNURLED NOW HEX CAP TO HOLD THE STEM ON VALVE. STEM LENGTH 1-1/4", AMERICAN PERMANENT WARE GRIDDLE GGM, GGT GARLAND GRILL G24
Disassembled, inspected and cleaned, stainless steel, 1/4" x 1/4" FNPT straight through, 120 volt, 1/8" orifice, solenoid valve for use on convection steamer. Bench tested @ 100PSI. List price $90
ONE NEW ASCO HV216585-006 (also numbered as HV216585-6, HV2165856, ASCO ORDER NUMBER 00097) 2 1/2" FUEL GAS VALVE. CABLE-RELEASE, 2/2 NORMALLY CLOSED, 2 1/2" FNPT. VALVE CLOSES UPON CABLE RELEASE (VALVE NORMALLY CLOSED).
Part No.: B-1VM4-S4 Description: Brass Integral Bonnet Needle Valve, 0.37 Cv, 1/4 in. MNPT x 1/4 in. Swagelok Tube Fitting, Vee Stem Flow Pattern Straight (2-way) Valve Material Brass End Connection 1 Size 1/4 in End Connection 1 Type Male NPT End Connection 2 Size 1/4 in End Connection 2 Type Swagelok® tube fitting Handle Color Black Handle
Used 201-47-01 valve with PFA (-3) nuts, in good working condition, had been used with deionized water. Manually Operated Diaphragm Valves 1/4" Orifice, 2-way, 1/4-turn, Leak Detection Option Port Connection: 1/2" Flaretek® flared tube Nut Option: PFA Nut (-3)
You are bidding on a New SMC Time Delay Check Valve, Model # VR2110 - fully plumbed for turn key assembly. Combination of adjustable orifice and fixed f
A new C2DB1132 Skinner Valve Division of Honeywell. An "ordinary location shut off safety valve for air, water and some refrigerants",1/8" female ports, 130 psi with 7/64 orifice, 120/60v. Free shipping to the U.S.
Bidding on 3 Never Used- Asco Red Hat New Solenoid BrassValve's One is used for water- Has a 1/4 in. pipe and 3 3/32 in.- orifice- 12 watts -Cat No. 332021 No instructions for this valve.
Kerick Valve MA252 PVC Mini Float Valve, Tank Mount, Adjustable Arm, 1.5 gpm at 60 psi, 1/4" Tube This Kerick MA252 float valve is a tank-mount style with an adjustable arm, and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.093" orifice and its estimated rate of flow is 1.3 gallons per minute (gpm) at 40 pounds per square inch (psi) and 1.5 gpm at 60 psi.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.