+ Post new Ad

Other Plastic Processing Tools

The average price for current category was $2,366.40 last month.

There are 3952 ads in this category.

RepRap 3D Printer PCB Heatbed MK2B Heat Bed Hot Plate For Prusa Mendel 12V 24V

Reprap 3d printer pcb heatbed mk2b heat bed hot plate for prusa mendel 12v 24v

  • ??, ???, China
  • Jun 9th
Dimensions 214mmx 214mm Laminate FR4 1.6+-0.15mm 2 layer, 35?m copper
MK7 Drive Gear.Reprap extruder pulley for 1.75/3mm Filament.Bore 5mm/Steel

Mk7 drive gear.reprap extruder pulley for 1.75/3mm filament.bore 5mm/steel

  • ShenZhen, China
  • Jun 9th
worldtechod
SIBE Automation Single Station Dual Platen Vacuum Forming Machines

Sibe automation single station dual platen vacuum forming machines

  • Randolph, Vermont, United States
  • Jun 9th
The frame of the machine is built of heavy-duty aluminum extrusion The maximum forming area is 22"x22" The fully adjustable manual clamping frame will accommodate a maximum sheet size of 24"x24". Heating of the material is provided by energy efficient ceran glass heaters panels with a heat density of 15 watts per square inch, with 4 independently controlled heating zones, control of each zone will be done by the PLC. Switching on off of the zones is performed by solid state contactors.
10 Colors Vertical PLA Filament 1.75 25CM Length for 3D printer 3D printing pen

10 colors vertical pla filament 1.75 25cm length for 3d printer 3d printing pen

  • Hong Kong, China
  • Jun 9th
Black Heatbed MK2B 12V 24V PCB Hot Plate Heat Bed Mendel Reprap 3D Printer SWTG

Black heatbed mk2b 12v 24v pcb hot plate heat bed mendel reprap 3d printer swtg

  • Shenzhen, China
  • Jun 9th
?????
1.5" Sterling Extruder, 42:1 L/D, 15 Hp

1.5" sterling extruder, 42:1 l/d, 15 hp

  • Elk Grove Village, Illinois, United States
  • Jun 9th
Used 1.5" Sterling Extruder, 42:1 L/D, Serial # 15409 Parts Machine, 17.5:1 Gear Box Ratio Hot Fed Feed Section 15 hp motor Stock 7754 This is used machinery sold "as is". There are no warranties of any kind. Bidder/Buyer assumes all risks, is solely responsible for the safe use of this machine and agrees to full indemnify Arlington.
2.5" Welex Extruder, 24:1 L/D, Air Cooled, 20 HP

2.5" welex extruder, 24:1 l/d, air cooled, 20 hp

  • Elk Grove Village, Illinois, United States
  • Jun 9th
Used 2.5" Welex Extruder Model 200. 24/1 AC, 20 hp Reliance DC motor & 1/3HP blower, belt driven to gearbox, 10:1 gearbox ratio, non-vented, air-cooled, 24:1 L/D ratio, 4 barrel heat zones, 1 adaptor zone, 43" centerline height solid state plug in type instruments, 230 volt, water cooled feed throat, unitized control panel. Approximate Dimensions and Weight: 92” L x 36” W x 82” H 4,200 LBS.
33" wide Segen VTP-15 Trim Press

33" wide segen vtp-15 trim press

  • Elk Grove Village, Illinois, United States
  • Jun 9th
400 Ton Van Dorn Injection Molding Machine, Model 400-RS-48FHT

400 ton van dorn injection molding machine, model 400-rs-48fht

  • Elk Grove Village, Illinois, United States
  • Jun 9th
3D Systems VisiJet HR200 Material

3d systems visijet hr200 material

  • New York, New York, United States
  • Jun 9th
VisiJet® HR200 Plastic Material VisiJet® HR200 is the industry’s best direct micro-casting performance for a variety of applications such as extremely small and delicate medical instruments, devices and other custom cast metal applications.
IMS Heated Angeled Gate Cutter

Ims heated angeled gate cutter

  • Norfolk, Nebraska, United States
  • Jun 9th
Includes the Gate cutter, Two control units, two stands, and four pairs of hand grips.
Reprap 12v 40W Ceramic Cartridge Wire Heater For Arduino 3D Printer Mendel AI1G

Reprap 12v 40w ceramic cartridge wire heater for arduino 3d printer mendel ai1g

  • Shenzhen, China
  • Jun 9th
?????
thermoformer PI 2500 forming and cutting toggle set

Thermoformer pi 2500 forming and cutting toggle set

  • East Rutherford, New Jersey, United States
  • Jun 9th
Available are the upper and lower forming station and upper cutting station toggles (one each forming and two for upper cutting) for a 1970's vintage Packaging Industries 2500 thermoformer. Toggles are in decent condition and were well maintained when the machine was running. The forming station was a 12" platen size.
NEW 3D PRINTERS White ABS 0.7kg Plastic Spool

New 3d printers white abs 0.7kg plastic spool

  • BROOKLYN, United States
  • Jun 9th
SGP Star Grip 3/4" Screw Hand Knob 1/4" USG

Sgp star grip 3/4" screw hand knob 1/4" usg

  • Roanoke, Virginia, United States
  • Jun 9th
B9 Creator 3D printer

B9 creator 3d printer

  • Lisbon, Lisbon, Portugal
  • Jun 9th
We are dental laboratory and purchased this machine to produce plastic patterns to cast some parts that are now available from our suppliers. It has a new vat coating (zero prints). Will also ship half a litter of Red Cherry resin.
8Pcs M6x25mm Male Thread 32mm Star Head Dia Screw On Type Clamping Knob

8pcs m6x25mm male thread 32mm star head dia screw on type clamping knob

  • Hong Kong, Hong Kong
  • Jun 9th
[TITLE]
M8 x 40mm Male Thread 32mm Star Head Dia Screw On Type Clamping Knob 8 Pcs

M8 x 40mm male thread 32mm star head dia screw on type clamping knob 8 pcs

  • Hong Kong, Hong Kong
  • Jun 9th
[TITLE]
RepRap, 3D Printer, SmartOne150, Assembled, 1.75 filament, 0.35 Nozzle, HeatBed

Reprap, 3d printer, smartone150, assembled, 1.75 filament, 0.35 nozzle, heatbed

  • Brooklyn, New York, United States
  • Jun 9th
 RepRap, 3D Printer, SmartOne150, Assembled, NEW Complete 3D printing system assembled and calibrated. Based on Neylon coated rollers, very low noise when printing. Printer size: 340mm x 340mm x 380mm (13"x13"x15").
10 Pcs M8 x 50mm Male Thread Clamping Screw on Star Knob Grip 32mm Dia Head

10 pcs m8 x 50mm male thread clamping screw on star knob grip 32mm dia head

  • Hong Kong, Hong Kong
  • Jun 9th
[TITLE]

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies