Other Woodworking Equipment & Machines (Woodworking Equipment & Machines) for sale, page 167

Wysong & miles 600 multi spindle dovetailer, woodworking

Stone Mountain, Georgia, United States
Jan 30th

Wysong & Miles 600 Multi Spindle Dovetailer

10" dia. automatic (pneumatic) industrial grade blast gate

Washington, Michigan, United States
Jan 30th

Our air-operated gates are fully automatic using an air cylinder that has power in both directions. Instant open/close. 35 lb.

Delta 1/2 mortise chisel and bit 17-004

Belleville, Wisconsin, United States
Jan 30th

This is Delta item #17-004. This is a 1/2" mortise chisel and bit. The shank is a standard 5/8" so it will fit in most mortiseres without spacers.

Delta 3/8 mortise chisel and bit 17-003

Belleville, Wisconsin, United States
Jan 30th

This is Delta item #17-003. This is a 3/8" mortise chisel and bit. The shank is a standard 5/8" so it will fit in most mortiseres without spacers.

Delta 12-1/2" portable planer knives, 22-562, fits other mach. also, see list

Belleville, Wisconsin, United States
Jan 30th

This is a set of 2 Delta 12-1/2" double edge knives, part no. 22-562. These will fit the 12=1/2" Delta portable planers 22-560, 22-565, TP305, and TP400LS.

Scm model olimpic k 208e edgebander

United States
Jan 30th

Amerock hinge boring machine 110v single phase excellent condition

Saint Petersburg, Florida, United States
Jan 30th

var itemNumber = window.ebayItemID ?

Delta 49-101 hd shaper drive belt, and 13 other delta machines

Belleville, Wisconsin, United States
Jan 30th

This is the drive belt for the Delta HD shaper. It matches the Delta no. 49-101 belt.

Oliver 4705 shaper, 5hp, 1ph, powermatic

Stone Mountain, Georgia, United States
Jan 30th

Oliver 4705 Shaper

Jlt 79k-6-dc 26" x 62" capacity single station pneumatic door clamp

Stone Mountain, Georgia, United States
Jan 30th

JLT 79K-6-DC 26" x 62" Capacity Single Station Door Clamp

Jlt 79f-8-pc 8' multi level panel clamp

Stone Mountain, Georgia, United States
Jan 30th

JLT 79F-8-PC 8' Panel Clamp

Staubli rx160 robotic arm - cnc milling low usage hours - slightly used

Red Deer, Alberta, Canada
Jan 30th

6 axis Staubli RX160 Robotic Arm - Stationary Gantry Mount and Cell Enclosure (Works with 5 axis tool paths) 2007 Staublit RX160 Robotic Arm configured for CNC Milling using MasterCam and RobotMaster Software. System comes complete with safety cell enclosure, stationary gantries.and 7hp spindle. MS8 Controller and 600v power transformer.

Dayton 1z967a dust collector single 1 phase 1/2 hp 450 cfm 19" inch

Francis Creek, Wisconsin, United States
Jan 30th

var itemNumber = window.ebayItemID ?

Wilkerson refrigerated dryer, 500cfm, 4hp, 208/230v

Sheboygan, Wisconsin, United States
Jan 30th

ID: A-1-073 All specifications subject to verification 4 HP208/230 V3 Phase60 Hz500 CFM Email or call 1-800-793-4494 if interested in this machine.

Dust master (dust collector) 3 phase (1 hp) cincinnati fan and ventalator co.

North Freedom, Wisconsin, United States
Jan 30th

DUST MASTER ( MODEL 100) 1 HP 3450/2850 RPM 3 PHASE POWER, 208/220/440 VOLTS, CORD IS DISCONNECTED. GENERAL ELECTRIC MOTOR. COMES WITH A 50 GALLON DRUM AND 4 WHEEL CART HOSES NOT INCLUDED.

Donaldson dalmatic dce du45rf 12ad dust collector w/ rotary air lock

Sheboygan, Wisconsin, United States
Jan 30th

ID# V-1-189As Taken From Service15HP, 460V16' 3" H x 7' 9" L x 3' 8" W3Ph, 60 Hz3500 CFM8" air infeed, 6" outfeed, 4" vent pipeUsed InsideWith electrical controlsw/ rotary air lock

Aer refurbished systems (inv.29582)

Portland, Connecticut, United States
Jan 30th

AER Refurbished Systems (Inv.29582) Old S/N 53422 - New S/N 421 Assy. MVW 10-20 rework 1 HP 230/460 volts 3 phase 4" inlet (Inv.29582)

Jet mini lathe bearing set

Belleville, Wisconsin, United States
Jan 30th

This is a pair of bearings for the arbor assembly on the Jet mini lathe model nos. JWL-1015, JWL-1221, and JWL-1014. Shipping on this item is free via USPS or UPS.

**sale** jlt cabinet door clamp **5% discount** 79k-6-dc 26" x 62" *brand new*

Bonita Springs, Florida, United States
Jan 30th

Brand New; Lifetime Warranty ****SALE 5% DISCOUNT******-----ENDS FRIDAY SEPT. 5TH 2014 General Info: Stock#: 79K Machine Name: JLT 79K-6-DC 26" x 62" Capacity Single Station Door Clamp Condition: New Brand: JLT Model: 79K-6-DC 26" x 62" Capacity Single Station Pneumatic Door Clamp. PRODUCE 100+ Stile & Rail Cabinet Doors Per Day.

Kreg k5 pocket hole jig + kreg square cut kma2600

San Ramon, California, United States
Jan 30th

THE NEW K5 KREG JIG KREG MODEL: K5 NEW IN BOX! NOW AVAILABLE... The Most Advanced Kreg Jig® Yet.