+ Post new Ad

Other Woodworking Equipment & Machines

The average price for current category was $8,671.30 last month.

There are 4435 ads in this category.

Kreg DK1100FP Single-Spindle Pneumatic Pocket Hole Machine

Kreg dk1100fp single-spindle pneumatic pocket hole machine

  • Bonita Springs, Florida, United States
  • Jan 30th
This is a Brand New in the Box Kreg DK1100FP Single-Spindle Pneumatic Pocket-Hole Machine
Steff Power Feeder; Model #: 2034

Steff power feeder; model #: 2034

  • Bonita Springs, Florida, United States
  • Jan 30th
Steff Power Feeder; Model #: 2034 (3) Rollers and (4) speeds of 13-26-36-72 FPM; 1 HP motor; 4-3/4" roller diameter; 2-1/4" roller width.
Hoffmann Bench-Top Routing Machine; Model #: MU2 **BRAND NEW**

Hoffmann bench-top routing machine; model #: mu2 **brand new**

  • Bonita Springs, Florida, United States
  • Jan 30th
Hoffmann Bench-Top Routing Machine Model #: MU2 General Info:
CTD 12" Mitre cut-off saw; Model #: M25R

Ctd 12" mitre cut-off saw; model #: m25r

  • Bonita Springs, Florida, United States
  • Jan 30th
CTD 12" Mitre cut-off saw; Model #: M25R General Info: This rugged, accurate heavy duty indus
JLT Single Station Miter Door Clamp; #: #79K-6-M- Brand New; Lifetime Warranty!

Jlt single station miter door clamp; #: #79k-6-m- brand new; lifetime warranty!

  • Bonita Springs, Florida, United States
  • Jan 30th
JLT Single Station Miter Door Clamp; Model #: #79K-6-M ***Brand New*** Lifetime Warranty*** General Info: 26" x 62" Capacity Miter Door Clamp
3mm Two Flute Parallel Shank Keyway Milling Cutter Gray

3mm two flute parallel shank keyway milling cutter gray

  • Hong Kong, Hong Kong
  • Jan 30th
ebay
Powermatic 26 shaper quill

Powermatic 26 shaper quill

  • Monroe, Georgia, United States
  • Jan 30th
Powermatic 26 shaper quill...This is a used Powermatic shaper quill with a 3/4 inch spindle, this is the one that will take a router bit attachment,(NOT INCLUDED)......slight surface rust...Bearing turn as they should......
Delta Rockwell Unisaw Throat Plate/Insert, Zero Clearance.

Delta rockwell unisaw throat plate/insert, zero clearance.

  • Cathlamet, Washington, United States
  • Jan 30th
Unused zero clearance throat plate for a Delta Unisaw.3 3/4" x 13 3/8"Great condition, see pics for details. Check my other listings for more Unisaw parts.I will combine shipping.Paypal please.
Delta Rockwell Unisaw Lock Knob

Delta rockwell unisaw lock knob

  • Cathlamet, Washington, United States
  • Jan 30th
Used lock knob from a Delta Rockwell Unisaw, will also fit the H.D. shapers.Good condition, see pics for details. Check my other listings for more Unisaw parts.I will combine shipping.Paypal please.
Delta Rockwell Unisaw Motor Pulley

Delta rockwell unisaw motor pulley

  • Cathlamet, Washington, United States
  • Jan 30th
Used motor pulley from a Delta Rockwell Unisaw. 3 9/16" diameter 3/4" bore.Good condition, see pics for more details.Includes just what is in the pics. I will combine shipping.
Vintage Delta/Rockwell/Homecraft Chip Dust Shoot Table Saw Or Jointer

Vintage delta/rockwell/homecraft chip dust shoot table saw or jointer

  • Madison, Wisconsin, United States
  • Jan 30th
Vintage Delta/Rockwell/Homecraft Chip Dust Shoot Table Saw Or Jointer
Anigre Veneer 700'+ roll virgin no glue

Anigre veneer 700'+ roll virgin no glue

  • Montgomery, Minnesota, United States
  • Jan 30th
Anigre wood veneer. 700'+ roll. 7/8" wide.
JLT Model #79D-6 Capacity Single Station Pneumatic Door Clamp

Jlt model #79d-6 capacity single station pneumatic door clamp

  • Salem, New Hampshire, United States
  • Jan 30th
JLT Model #79D-6 Capacity Single Station Pneumatic Door ClampWorks 100%
Rare Vintage Delta Rockwell 14" Band Saw Model 890 (1934-1936)

Rare vintage delta rockwell 14" band saw model 890 (1934-1936)

  • Amesbury, Massachusetts, United States
  • Jan 30th
Up for your consideration is a Rare Vintage Delta Rockwell 14" Band Saw, Model 890. Based on the wheel covers and open lower casting this can be dated between 1934 and 1936. It comes with the vintage open welded stand and a 1/2 HP GE motor from the same era (not an original Delta motor).
Dustek W2000 20 HP 4-Bag Dust Collector - SHOP DUST COLECTOR - CNC MUST

Dustek w2000 20 hp 4-bag dust collector - shop dust colector - cnc must

  • Ridgewood, New York, United States
  • Jan 30th
GREAT FOR LARGE PRODUCTION SANDERS ,PLANERS SHOPS. A MUST FOR CNC SHIPPING TO DISCUSS
36" Bandsaw

36" bandsaw

  • Anderson, Texas, United States
  • Jan 30th
This is a 36" band saw. Yates American; that was used in a veneer shop. Its is in good working condition and can carry a 2" blade if you want to resaw lumber.
POWERMATIC 15" Planer (Woodworking Machinery)

Powermatic 15" planer (woodworking machinery)

  • Placentia, California, United States
  • Jan 30th
DELTA 12" Vertical Disc Sander (Woodworking Machinery)

Delta 12" vertical disc sander (woodworking machinery)

  • Placentia, California, United States
  • Jan 30th
Woods Vac. Lifter Model MR411 Electric, 700 Pound capacity, customer error Save

Woods vac. lifter model mr411 electric, 700 pound capacity, customer error save

  • Laurel, Montana, United States
  • Jan 30th
Customer Error Regular Price $4,297.00 Sale priced $3,697.00 PLUS FREE FREIGHT (SEE NOTE) NOTE: FREE FREIGHT APPLIES TO LOWER 48 STATES ONLY With continuous 360° rotation, these Powr-Grip® vacuum lifters supply an efficient and economical way to feed vertically oriented processing machinery.
DAVIS & WELLS Single Spindle Horizontal Boring Machine (Woodworking Machinery)

Davis & wells single spindle horizontal boring machine (woodworking machinery)

  • Placentia, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies