Other Woodworking Equipment & Machines (Woodworking Equipment & Machines) for sale, page 192

Powermatic 26 & 27 wrench for the 1" spindle also powermatic 66 saw etc.

Alpharetta, Georgia, United States
Jan 30th

Powermatic 26 & 27 wrench for the 1" spindle also Powermatic 66 saw etc. Small spots. No effect for to use.

Wood's vacuum lifter manual tilt 1200 pound capacity model mt8air

Laurel, Montana, United States
Jan 30th

Wood's Model MT8AIRS Designed to fit between tight, vertical storage racks, these Powr-Grip® vacuum lifters can handle stone and other high-density materials with rough surfaces or irregular shapes. Standard Vacuum Pad Spread: 21" x 77" [532 x 1956 mm] Number / Size of Vacuum Pads: 8 / 10" [25 cm] dia. lipped vacuum pads Load Capacity: 1200 lbs [545 kg] (On smooth, nonporous surfaces.

**free bits** conquest standard 13 line borer pneumatic 230v/1ph w/hinge unit

Bonita Springs, Florida, United States
Jan 30th

**COMPLETE SET OF NEW FREE BITS** **Offer Ends November 26th**

**free bits** conquest construction drill, 23 spindle

Bonita Springs, Florida, United States
Jan 30th

**COMPLETE SET OF NEW FREE BITS** **Offer Ends November 26th**

Lot of 6 scm upper dust hoods for double end tenoner

Unionville, Pennsylvania, United States
Jan 30th

Lot of 6 SCM Upper Dust Hoods for Double End Tenoner I think these are for one or more models of SCM double end tenoners Bin: C0100 0575390053E

Aercology weld air portable air cleaner wv-4000c

Cedarburg, Wisconsin, United States
Jan 30th

AERCOLOGY WELD AIR PORTABLE AIR CLEANER MDL#: WV-4000C SERIAL#: 31259 120 VOLTS SINGLE PHASE SELLING AS IS WILL SHIP AT BUYERS EXPENSE CALL RUSSELL @ 414 940 3288

Hoffmann mu2-p pneu. bench-top machine with custom table

South San Francisco, California, United States
Jan 30th

HOFFMANN, MU2-P-PNEU We have three: Hoffmann MU2-P Pneu. Bench-Top Machines available. cost from Hoffmann is: $3,630.00 FOB New York.

Ritter r700 sander with tilting worktables

Millville, New Jersey, United States
Jan 30th

Ritter R700 double edge sanding machine S/N: 593. 4" x 60" belt, (2) 12" x 65" tilting worktables, 2HP, 220/240V three phase. Unit is located in Millville NJ, 08332 and can be shipped Truck Freight Collect or we can add the freight charges to your cost.

Rockwell-invicta rs-15 rs15 43780 industrial shaper ***ontario, calif*** *delta*

Ontario, California, United States
Jan 30th

Powematic 26 shaper 5 hp

Piedmont, South Carolina, United States
Jan 30th

Nice 3 phase Powermatic model 26 shaper with 5 hp motor. 1" shaft. The cutter head in the picture has been removed.

Forward reversing switch

Ogden, Utah, United States
Jan 30th

Manufactured by A - H & H part # AW794 This switch is a double pole, double throw, 120 Volt, 20 AMP. - 250 Volt D C, 10 AMP (1 1/2 HP) 230 Volt A C, (2 HP) Has a safety toggle to prevent going forward into reverse without a hesitation, or vice versa. This switch fits a standard electrical box.

Clausing lathe 5900 series crossslide screw assembly - with gib / complete

Frankfort, Kentucky, United States
Jan 30th

Complete cross slide assemblyu for 5900 series lathes-screw shows some wear , but " largevise" can repair them-has gib and nut-Questions?502.330.2242

Delta rockwell unisaw motor pulley, lta-431 5 1/2" dia. for 1725 rpm. motor

Cathlamet, Washington, United States
Jan 30th

Used motor pulley from a Delta Rockwell Unisaw. 5 1/2" diameter for the 1725 RPM motor, 3/4" bore.Good condition, see pics for more details.Includes just what is in the pics. I will combine shipping.

Replacement filter bag for elastic band 708695

Murrieta, California, United States
Jan 30th

Replacement filter bag for DC-650 Includes an elastic band for easy installation

Up to 12 movotec ab ergonomic 6" lift systems

Rochester, New York, United States
Jan 30th

UP TO 12 MOVOTEC AB ERGONOMIC 6" LIFT SYSTEMS This is for up to 12 Movotec AB Ergonomic Systems, Part # MSY-01597, Model # 2-TBB-B4-150-FC complete with 2 Hydraulic Cylinders, N0. CB 1415 with a heavy-duty capacity of 500 lbs and approximately 6 inches of stroke -- piston measures approximately 1" diameter with 10' of cabling. Each bid is for ONE System.

Complete millbury bt 112 tenoner w/ cope heads /watch hd video demo

Naperville, Illinois, United States
Jan 30th

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Dayton dust collector , 1-1/2 hp, 115/230v , 1 phase , dba 82

Naperville, Illinois, United States
Jan 30th

UP FOR SALE DUST COLLECTOR , HERE ARE THE SPECS :

1" spindle set for delta hd shaper w/drawbar & wrenches for panel raising new

Oxford, Pennsylvania, United States
Jan 30th

Delta shaper 1" spindle made from an import generic part and machined to fit the Delta USA made Heavy Duty shapers 1" spindle has the rigidity required for panel raising and other wide diameter or tall cutters. -Includes draw bar, draw bar nut, 1" spindle machined to fit Delta Heavy Duty USA shapers. -Compatible with all Delta Heavy Duty heavy duty shapers manufactured prior to 2005.

2005 murphy rodgers 6000 cfm dust collector

Naperville, Illinois, United States
Jan 30th

HELPING YOU BUY WITH CONFIDENCE 100% POSITIVE FEEDBACK SINCE 1999 ________________________________________________________________________________________________________________________________________

Delta 1 1/2 h.p. single-stage dust collector (model 50-850) 902115-11-15-02

Lafayette, Indiana, United States
Jan 30th

The original filter bag has been replace with the more expensive but more efficient 2-micron canister filter shown in the pictures. It keeps the ambient air cleaner. One unused plastic dust bag is included along with 2 hose sections and two added fixtures shown.