How to Run a Lathe: How to Erect, Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19, by O’BRIEN BROTHERS J.J. O’Brien and M.W.
INDEXABLE TOOLHOLDER CONDITION = NEW INDEXABLE TOOLHOLDER MANUFACTURER = LMT THIS TOOLHOLDER IS A ON EDGE THREADING TOOLHOLDER FOR TNMA OR TNMC-32 STYLE INSERTS COOLANT THRU THERE IS AN INLET (COOLANT HOLE) LOCATED ON BOTTOM OF SHANK OFFSET FROM WERE THE INSERT WOULD SIT (ON TOP) THAT GOES TO TOP OF HOLDER THE INLET IS 1/8-27 NPT P
PNEUMATIC SWING CLAMP, SMC MODEL MK2B40-20R PORTS, G-1/8, SAME AS BRITISH STANDARD PIPE THREADS BORE, 40 MM CLAMPING STROKE, 20 MM ROTATION, CLOCKWISE THREAD IN ROD, M10X1.5 MOUNTING, THREADED HOLES ON BOTH ENDS MAX AIR PRESSURE, 145 PSI / 1.0 MPa
Used item in excellent overall working condition. This vintage vice weighs about 25 pounds. Opens from 0-4-1/4" capacity, with 3" x 1/2" jaw faces also has a set of lower pipe jaws below the regular jaws for gripping round type objects such as pipe.
YOU ARE BUYING ONE LOT OF 5 SANITARY STAINLESS STEEL CLAMPS FOR 1/2" PIPE 1" FLANGE OD. THESE CLAMPS FIT A PIPE SIZE OF 1/2" WITH A FLANGE OUTSIDE DIAMETER OF 1". MIXED MANUFACTURE.
YOU ARE BIDDING ON A NEW SPX-FT TEE CLAMP PIPE FITTING 1.5" SANITARY S.S. 316L PART 137-625X, 7MP-7. THIS 316L TEE PIPE IS BRAND NEW AND IN EXCELLENT FIRST QUALITY SHAPE.
A 1/2" ITT-Grinnell, CF8M cast, Stainless Steel bodied, Diaphragm Valve welded to a piping extension, with a 1-1/2" Tri-Clamp fitting attached close to the valve and with a Spraying Systems spray nozzle with a 1/8" NPT female thread attached at the far end, as pictured. The length from the Tri-Clamp fitting to the end of the Spary Nozzle is about 6-3/4". This ITT - Grinnell Diaphragm Valve and Spray Nozzle Assembly are custom welded, coming as pictured, and are in very good condition.
This is a really cool Vacuum Workholding / Positioning System for woodworking, carving, metal working, electronics work, factory automation, etc. The system consists of a PIAB F110 4-1/2" silicone vacuum cup mounted to a 3/8" x 3" pipe nipple, mounted to a Stilson 6625 compressed air vacuum generator. This system operates under the venturi principle of vacuum.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.