plug gage for sale, brand-new and used.

LOT of (8) MASTER GAGE GO NO GO THREAD PLUG GAGE TOOL SHOP MACHINIST INDUSTRIAL Used but Clean

LOT of (4) GO NO GO THREAD PLUG GAGE TOOL SHOP MACHINIST INDUSTRIAL Used but Clean

include("http://

New Alameda Gage purchased in 1985 and never taken out of the package. Perfect condition. 5/16-18 UNC 2B, GO PD 3486, HI PD.

HITACHI ROTARY HAMMER You are bidding on a New in the Box Hitachi 18/16" Rotary Hammer with Case, Handle, and Depth Gage. Manufacture part number DH24PC3. This unit has a European plug on it but it can easily be replaced with a U.S.

HITACHI ROTARY HAMMER You are bidding on a New in the Box Hitachi 1 3/16" Rotary Hammer with Case, Handle, Chuck and Depth Gage. Manufacture part number DH30PC2. This unit has a European plug on it but it can easily be replaced with a U.S.

Measuring Tools: The Steel Rule; Calipers; Micrometer; Vernier Calipers; Fixed Gages, by John T. Shuman, originally published by the American Technical Society, Chicago, Ill., 1943. Reprinted by Nation Builder Books, Leesburg, VA, 2003.

~ This is a Complete Turn Key Ready to Operate Concession Trailer ~ -AND- She is in excellent condition and is ready to go for her 2015 Event Season!

CURTISS WRIGHT FLOW CONTROL COMPANY P/N V-524-S CDI PERMA PLUG KIT NEW SIZE RANGE 0.524'' / 0.525'' TO 0.585'' 13.34MM TO 14.86MM 10 PCS PLUGS PER BOX WITH GAGE MAX. TEMP 900 DEG F MAX. PRESS.

USA UNC-2B

Some of these pins are new and some are used. Most of the sizes are correct and some boxes have more than 1 pi in it.

60" SILVER KING REFRIGERATED PIZZA PREP TABLE 2 DOOR - NEW MODEL SKPZ60/C2 LENGTH 60" DEPTH 37.18" HEIGHT 42" COMPRESSOR 1/3 HP AMPS 8.5 WEIGHT 470 lbs. EXTERIOR Stainless steel. Galvanized back and bottom.

Title of your page goes here 1941 MACHINE SHOP TOOLS LATHE MILL JIGS FIXTURES FOUNDRY GEAR CUTTING      This is a 568 page, 5 3/4” x 8 1/2”, hardcover book titled The New Encyclopedia of Machine Shop Practice.   The book was edited by George W. Barnwell Professor of Production Practice Stevens Institute of Technology and was copyrighted and published in 1941.

May be unused but the box was opened so not sure. It is in great shape though. Includes instructions, tool to easily remove plug and fitted air gage tool.

Lot of machinist tools. First picture contains everything in the lot. A bunch of stuff is unused or barely used.

Some of these pins are new and some are used. Most of the sizes are correct.

(one) pressure reactor, mixer, DCI, 140 gallon, all wetted parts are made of inconel 625, all other stainless parts are 304. 32" inside diameter, 41" straight down the sides 45" to bottom center, 51" from top of inside lid to bottom. 9-3/4" center top opening that mixing housing is attached to.

FOR SALE IS A NEW - WITH CRACKED HOUSING - LITTLE GIANT PUMP. THIS HARDWARE CAN BE USED TO MOVE WATER OR CIRCULATE WITHIN A CLOSED OR SEMI-CLOSED SYSTEM. SUBMERSIBLE WITH DIMENTIONS OF 7", 4.5" AND 5.5".

(92) Go, No Go Plug Gages. Up to .750" and most with handles. We acquired this lot and offer it as is.