point 500 for sale, brand-new and used.

IMADA TORQUE METER. MADE IN JAPAN. MODEL I-80.

FLUKE 123 SCOPEMETER 20MHz *CALIBRATED & CERTIFIED* Product Description The Fluke ScopeMeter series 120 is a handheld electrical test device that combines a two-channel digital oscilloscope for viewing electrical signals with a true RMS, manual- and auto-ranging digital multimeter on each input for measuring AC and DC voltage to 1,250V, resistance to 50M?, capacitance to 500?F, frequency to 50MHz for Fluke 123 models and 70MHz for Fluke 124 models, and duty cycle from 2% to 98%. The

ATG-500-1 Dial Tension Gauge Gram Force Meter Single Pointer 500 g Highlight: 1. High accuracy 2. Simple to test 3.

The following description was found from internet sources believed to be reliable, however, seller makes no guaranty to its accuracy.

Hewlett Packard Agilent 1663EP Logic Analyzer with pouch The HP 1663EP pattern generator's capability in the EP models allows designers to functionally test their digital design with a 32 channel, 100 M vector/sec, 256 K vector deep stimulus program. The operator can stimulate the device under test and see how it responds to specific signals or clock speeds. Also,the pattern generator can be used to substitute for missing sub-systems.

?????

Tektronix TDS 540 Digitizing Oscilloscope 500 MHz 1GS/s FAILED SELF TEST. good cosmetic condition. unit is sold AS-IS no warranty.

HP 54522A 500 MHz Oscilloscope The Hewlett Packard 54522A 500 MHz realtime oscilloscope has the extra performance and features that you need to get an accurate view of the high frequency signals, whether you do analog or digital design, R&D or manufacturing test. With 32 K memory per channel, 2 channels at up to 2 GSa/s, 1 ns peak detect, and sophisticated triggering, you can be confident that you won't miss critical signal activity.

The iLoad digital low profile load cell offers direct measurement of loads via the USB port of a PC. No need for signal conditioners, data acquisition systems or special software. Just connect and start measuring!

Noise/com Noise Generator model NC 8111 5 MHz - 1 Ghz applications: • CATV testing • Development testing • HDTV field testing • General Purpose specifications: • Output: White Gaussian Noise, 1 Watt, -60dBm/Hz • Output Connector: SMA • Frequency Range: 5 MHz - 1 GHz • Flatness: ±2.5 dB • Attenuator: 0 to 10 dB in 1 dB steps • Impedance: 50 Ohms • Power: 120 VAC, 60 Hz at 500 mA • Operating Temperature: -10°C to +60°C X UNTESTED, used. powers up. minor cosmetic issues.

New IR Laser Infrared Gun Thermometer Temperature Meter Tester Non-Contact US A+

Untitled Document

From the Manufacturer

Fluke 62 Infrared Thermometer