Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 0

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 1

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 2

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 3

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 4

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 5

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 6

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 7

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 8

Power sluice High Bank System 5'X12" with Fine Gold Recovery, US $900.00 – Picture 9

Power Sluice High Bank System 5'x12" With Fine Gold Recovery

US $900.00

Columbus, Indiana, United States
Jan 30th

Open on mobile:
QR code

Complete gold mining system. Power sluice with stand and hopper, includes 5' long by 12" wide apx 3" tall sides sluice box made of 16 gage aluminum. 6.5 HP 212cc pump with apx.10,000 GPH way more than needed but you have it if you want it. All hoses and connectors. PLUS a fine gold recovery system that saves hours of time by processing your fine sand clean out. The pay dirt hopper is 20" long and 16" wide and 20" tall from its base. The sluice has 3' of green miners moss 2- 12"X12" rubber mining mats. The moss is covered with 1/2" rased expanded metal. Water sprays from all sides of the hopper to effectively wash the pay dirt out of the gravel I added a quik turn ball valve and boiler drain before the valve so you can shut off the water flow to the sluice and still use a garden hose for your wash out. The stand is completly adjustable. The fine gold recovery is Apx. 19.5" long by 8" wide and is coated with plasti-coat to give it a rubber texture and help the gold stick. It is completly adjustable front to back and side to side and can be hooked to your pump using a your garden hose or a fountain pump witch I don't have. I have a vibrating motor that works very well I will send with it. It can be used both in the field or at home. Total weight is 108 pounds before creating and may be shipped in 2 cartons. I will pay all creating cost and any additonal shipping above the listed amount. The system was made in my shop in early summer 2014 and the pump was purchased for the system at the same time. I check my mail several times a day so if you have any questions please let me know. As for the little guy, He was the engineer. I could not have done it without him. Thanks for looking

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Slightly used. 1-15 minute test run and 4 hours of running pay dirt. I painted the out side surfaces to cut down on glare and there are some scatches in the paint on the top of the hopper and the back where the tailings were discharged.”