pto control for sale, brand-new and used.

Designed for use on sprayer rigs that require just a little more output. Interlink brand ( interlinkag.com.au ) # Input shaft drive 13/8" x 6 spline. # Control valve fitted # 85 litres per minute at pressures to 450 psi.

Here’s a really unique and versatile surplus/salvage unit. This heavy duty, industrial gearmotor was originally used to simultaneously drive the wire puller/feeder rolls on a machine that stripped, cut, and crimped terminals on electrical wire leads. BUT!

CabCAM Video System, 7" Monitor and 2 Cameras A-CC7M2CQ DON'T SEE WHAT YOU ARE LOOKING FOR PLEASE CALL MCHENRY POWER EQUIPMENT 815-344-7660 Notes (2) Waterproof Cameras: CCD Color with Audio, 18 Infrared Illuminators Allow up to 16 feet of Visib ility in the Dark, Image Mirroring Function, Made to Wi

Been tested and works. Made to program the ECU of an AuraGen system after everything is connected and installed. Plugs into the ECU and the other end to a laptop.

Item listed is a Used Briggs & Stratton 5hp Horizonal Shaft Engine. This had been checked over, The ignition/points have been replaced, the Carburetor and Gas Tank are also Clean and in good working condition, a new Carburetor Diaphragm and Air Filter Element have been installed. The Valve Tolerances have been checked and are within spec, and New Piston Rings have been installed.

Item listed is a Used Briggs & Stratton 5hp Horizonal Shaft Snow Blower Engine. This was originally installed on a Montgomery Ward's Snowblower, Based on my inspection this doesn't appear to have a lot of hours on it. The Cylinder looked good and still has cross-hatches visable from when the block was machined.

Item listed is a Used Briggs & Stratton 5hp Horizonal Shaft Engine. This has been checked over. This has Electronic Ignition, a new Carburetor Diaphragm, Fuel Tank Gasket, Sump Cover Gasket, Pull Rope, and Air Filter Element have been installed.

Metaris Hydraulic Unloader Gear Pump & Motor Combination MHUP44 New / Unused