2018UD6G.2.96 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.
2013UD6G.3.12 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 04A, or 548001016, or 548-001-016. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.
2020UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
Dunkermotoren Brushed 24 Volt Permanent Magnet DC Electric Motor Details Dunkermotoren Model: GR42x25 Brand new stock 24 Volt 860 mA 14 Watts 3600 RPM rated High-torque Ball-bearing design for long life 3.5" Length x 1.69" Diameter Small pulley mounted on shaft Shaft diameter is 3mm Pulley diameter is 8mm Threaded mounting holes Twisted pair
2019UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
4000 RPM Buhler Permanent Magnet 24 V DC Hobby Motor with Large Grooved Pulley New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 4 - 24 VDC No load speed at 24 VDC: 4,000 RPM No load current: 330 mA Starting current: 14.5 A Can be operated in either direction: simply reverse polarity of power supply Shaft dimensions: 14 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 9 mm Long x 25 mm Diameter Aluminum pulley features 4 grooves Dimensions (not in
This auction is for one 2 HP Electric Doerr Motor, Model # LR22132, RPM 3450, 12 AMPS, 230 LO Volts (can be converted to 115 volts), 1 Phase, HZ-60, FR-H56, CODE-J, DUTY-CONT, INS CLASS-BR, MAX. AMB.-40, 5/8" shaft. This motor was used very little.
This unused conveyor drive pulley features Roll-Tech's innovative design which puts the hydraulic motor inside the conveyor pulley, saving space and parts. The roller is 4.5" in diameter by 12" long and is keyed for application of sprockets. The shafts protruding from the motor are 1.5" in diameter and terminate into a heavy duty stainless bearing assembly.
Knife Making: Belt Sander/grinder high quality Drive Wheel Assembly for 3/4" drive shaft Heavy Duty and build to last. Many of my recent customers expressed their interest in certain parts that they would likely use in their home-build belt sanders. Here we offer the proven d
CMI RC103 PULLEY Famous original blue pulley. Anodized aluminum sideplates, 2 3/8 inch aluminum sheave, sealed-needle bearing and stainless steel axle. 5/8 inch rope capacity.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
2022UD6G.3.36 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for a Lot of Four (4) Motors. You may bid / buy any number of lots, up to the total quantity available above.
2016UD6G.74 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.