pulley bearing for sale, brand-new and used.

Aluminum Pulley or Block With 18" Sheave Net Weight 30 lb. While it shows no use I'll list it as used. Examine the photos carefully.

Up for Auction is a USED Campbell Okmulgee, OK, Wire or Rope Pulley Block - Combination Type Pulley. Has a 3,000 pound working load, weighs about 8 lbs, made of aluminum alloys with steel shafts and bearings. This is a Heavy Duty Professional / Industrial / Utility tool used when installing the large wires onto electrical poles in our neighborhoods and for threading wire or rope overhead from pole to pole, building to building or tree to tree.

HD Harmonic Drive Systems SHG-14-50-2UJ Key Features Common to All Series · High torque · Zero Backlash · Accuracy <1 arc-min (most sizes) · High torsional stiffness · Robust cross roller output bearing · Output flange for direct mounting of load 2UJ Series Features · Conventional Input Shaft These units will ship with a pulley mounted on the input and output shaft. The pulleys show minimal signs of wear.

ebay

2010UD6G.13.40 New Sanyo Denki, Ball Bearing, 2 Phase, 42MM Sq. (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for a Factory Tray of (20) Motors.

2018UD6G.2.96 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2013UD6G.3.12 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 04A, or 548001016, or 548-001-016. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2020UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

Dunkermotoren Brushed 24 Volt Permanent Magnet DC Electric Motor Details Dunkermotoren Model: GR42x25 Brand new stock 24 Volt 860 mA 14 Watts 3600 RPM rated High-torque Ball-bearing design for long life 3.5" Length x 1.69" Diameter Small pulley mounted on shaft Shaft diameter is 3mm Pulley diameter is 8mm Threaded mounting holes Twisted pair

2019UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

4000 RPM Buhler Permanent Magnet 24 V DC Hobby Motor with Large Grooved Pulley New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 4 - 24 VDC No load speed at 24 VDC: 4,000 RPM No load current: 330 mA Starting current: 14.5 A Can be operated in either direction: simply reverse polarity of power supply Shaft dimensions: 14 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 9 mm Long x 25 mm Diameter Aluminum pulley features 4 grooves Dimensions (not in

MAKEBLOCK ALL-IN-ONE- STARTER ROBOT KIT IR VERSION BRAND NEW! FACTORY SEALED! BOX HAS SOME DAMAGE BUT ITEM IS BRAND NEW

This Sale Is For A Laboratory Surplus Robotics Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin Is 10mm In Diameter And About 29mm Long From The Top Of The Clip To The Top Of The Shaft. This Item Is In Excellent Operational And Great Cosmetic Condition.

This Sale Is For A Laboratory Surplus Robotics Twin Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin At The Base Is 10mm In Diameter And At The Top 1/2" In Diameter. It Is About 2 5/8" Long From The Top Of The Clip To The Top Of The Shaft.

This Sale Is For A Laboratory Surplus Robotics Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin Is 10mm In Diameter And About 29mm Long From The Top Of The Clip To The Top Of The Shaft. It Includes The Large Cam Gear In The Pictures.