rail clamp for sale, brand-new and used.

This is a Factory New Duct-O-Wire pendant directional switch. The SP-2 is a 2 speed button switch. these switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant directional switch. The SP-1 is a single speed button switch. these switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant enclosure. The L8-D is a 8 button pendant with no switches. the switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant enclosure. The L2-S is a 2 button pendant with no switches. the switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant enclosure. The L10-D is a 10 button pendant with no switches. the switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant assembly. The L6-S-1M is a 6 button pendant with 4 single speed switches and a Maintained On-Off switch. The Slim back pendant will fit many brands of hoist with little to no modifications.

This is a Factory New Duct-O-Wire pendant Momentary On-Off Switch. These switches are sold seperately so you can configure your pendant to fit your application. We have many different sizes and configurations if this is not what you are looking for.

Truck Bed Ladder Rack Econo Racks Kargo Master The Kargo Master Econo Truck Bed Rack provides a simple and affordable solution for reliable cargo handling. The Kargo Master Econo Truck Rack is constructed using 2? steel tubes and designed with a loading capacity that holds up to 500 lbs and offers adjustable height from 24?

Up for bid is a narrow span (6') scaffold tower, 15' high. It is new, in the original packaging. There are 10 packages.

25997 Old-Stock, Packrite BC0001 Guide Rail Clamp, 3-7/16" Length, 2" width, . Item appears Unused and has been in storage for some time.. Austin Surplus SKU: 25997 Location: GRG-R02-P06-S05-G-0000368

Clearing out the yard. There are about 20 complete plaster type scaffolding frames that have been sitting outside for a long while and need to go.. Sold As-Is, in Morongo Valley, CA 92256, for local pick up only/Hand loading only.

For sale is an open boxed pack of Sandvik N151.2-A094-25-4G 1125 inserts w/9 new unused inserts. Please see pictures and ask any questions. Thanks for looking...

Wire EDM V-Block 1.5 X 5 X 5 (inch) Will hold up to a 3 inch diameter. 420 stainless steel (hardened 48-52RC) With - clamp - set up rail - stainless socket head cap screws - side rail (for standing block up or on its side) - (3) clamp screws The slotted screws are for M8 and M6 socket head caps screws they are machined 50 mm apart so these will work in any Wire EDM machine. Main Block is precision ground +/- .0002" flat/parallel

just bought some craftsman lathe parts as spares for my 10 inch but only the tool carriage compound fits so i am selling the gear cover, tailstock and carriage assembly. this auction is for gear cover part no. L5-28A.

Up for auction is almost brand new Mitutoyo height gage that I bought 30+ years ago for my garage shop. I have used it a couple of times. It has spent its life in the original box well perserved with no signs of any use and no abuse.

This sale is for ONE previously owned COPY of: G.A. Gray Company, THE NEW GRAY OPENSIDE PLANER CUB, bulletin 55-R2, (Cincinnati 1947) 16 pages bound in a slightly dirty soft cover with an old dealer stamp on the cover. This catalog has many images and describes the machine's bed, table, bearings, rail, heads, speed control, feed, rapid traverse, point control, auto rail leveler, safety crank, clutches, saddle clamp, slide clamp, harp clamp, side head, tool lifters, collars, and gears.

Receiver Wrench (M1) also (*M1A and M14) Unlike the other wrenches made for torquing Garand receivers, this set provides for smooth, uniform contact on top of the receiver ring and the bottom of the ring directly opposite. This wrench does not load the receiver rails (legs) as most other wrenches do and so eliminates the chance of deforming either a rail or a functional portion of the ring.

SPECIAL SHOP MADE V-BLOCKS MADE TO FIT OVER NARROW 1/2" WIDE WIRE EDM RAILS OR USE AS UNFINISHED TOOL ROOM SHOP PROJECT STEEL PARTS FOR SOME OTHER USE as shown in photos. Since little clamping pressure is needed to hold parts cut by a wire EDM, I believe the V-blocks were pushed up against small round parts with possibly a c-clamp added against the outer sides of the v-block if needed. Total weight of these 2 parts is about 1 3/4 pounds.

These bars and brackets were custom made by a company that built machine frames and were intended for setting up and prototyping machine bases and frames. Material is Nickel plated machined steel Please note: If you purchase this item we will ship a few bars and brackets to you for inspection before shipping entire amount. Free shipping to businesses located in the continental United States that have a standard loading dock easily accessible to standard over the road freight trucks.