red security door for sale, brand-new and used.

This is used and untested. RS232 stepper controller # 38285. See the item photos above for the actual contents of the auction and the exact condition of the item elements.

This is used equipment and it appears to be in good condition. The Ika heated stirrer is a little rough looking but it works properly. The Radleys equipment is in good shape.

This equipment is unused with no box and no instructions. It includes a multi position valve EMHMA EMMM06565, a valve actuator control module EMHCA-CE, and the cables pictured. We do not have the 24 volt power supply.

This equipment is unused with no box and no instructions. It includes a two position valve EHMA EM2M32642, a valve actuator control module EHCA-CE, a manual pushbutton switch and the cables pictured. We do not have the 24 volt power supply.

This is used, with two shelves and one desiccant tray. It is 12x12x12 heavy acrylic. The overall condition is good but it does have minor scratches and scuffs.

This is used and in good operating condition, the cosmetic condition is good as well with very minor surface imperfections. 4000 volts 200 watts max output. See the item photos above for the actual contents of the auction and the exact condition of the item elements.

These were removed from as dicontinued process at a major pharmaceutical manufacturer and are in good working order. This sale is for one controller and two pumps. I do not have the interconnecting cables.

This pump is lightly used and appears to be in good condition. It is hard to tell it from new and it is in the opened original box. This unit is untested however, we will offer a 30 day warranty on this pump.

This is used and untested beyond power up. It was set up to be wired in and plc controlled, we do not have the cables to connect the two 40 pitch pumps. The controller reset lights up when you start the pump, I presume it's because neither the PLC or the pumps are connected.

This pump runs well, the case is yellowed. The factory protective plastic is still on the control panel. The pump is a 1-100 RPM model and the pump head is a 7013-21 The pump head accepts masterflex tubing size LS 13 Specifications Type L/S® 13 Standard Max flow rate 36 mL/min (at 600 rpm) Min flow rate 0.06 mL/min (at 1 rpm)

This pump runs well. There is some sticker residue and some yellowing. The pump is a 10-600 RPM model and the pump head is a 7518-10 The pump head accepts masterflex tubing size L/S® 13, L/S® 14, L/S® 16, L/S® 25, L/S® 17, and L/S® 18.

This is a used pump in good operating conditiobn and good cosmetic condition as well. There is a slight yellowing on the top of the case it is otherwise near perfect. This is a high precision low volume pump.

This pump appears to be unused with no box and no manuals. It is a Leybold Heraeus TMP 150/45 Turbo Molecular vacuum pump. 10 Liters per second pumping speed 1x10-11 Torr Ultimate pressure.

This pump and drive are unused. The drive is a small single speed model (60 RPM) and the head is a quick load. the head uses size 18 tubing and delivers 3.8 mL per revolution.

These digital drives are in good operating condition and average cosmetic condition. With some yellowing and sticker residue. They are 60 to 3600 RPM digital gear pump drives designed for liquid transfer.

This is used and in good condition. Five port valve operates on 12 volts Dc and the small peristaltic pump is 120 volts AC. See the item photos above for the actual contents of the auction and the exact condition of the item elements.

This is used and in good condition. It has on board programming with Dosing Pipetting diluting Multichannel , Multidispense, Flow and Multisample functions. It has an eight port manifold included.

These are used IP 55 washdown pumps in very good condition. 220 RPM max 115 Volts AC. They have a 501RL Head We have several of these pumps available.

This is in good used condition. It can be used with one, two or three syringes. It is highly adjustable and capable of very fine feeds.

This is used and in good condition, it is variable speed and rotates 180 degrees. It operates on 120 volts AC. The flask clamp in replaceable.