retaining spring for sale, brand-new and used.

Used tool Spindle (Spring inside + Retaining + Tool Collar) Clean

ITEM IS BRAND NEW IN OPENED RETAIL BOX. ITEM HAS BEEN FULLY INSPECTED AND SHIPS COMPLETEHandcrafted Since 1971 | Free-parts-for-life Program | Lifetime Warranty | Latex-free | With SIX included conversion attachments, this stethoscope can be easily transformed into NINE different configurations, including a complete adult, pediatric, or infant cardiology stethoscope. Includes 3 pairs of MDF ComfortSeal eartips: Small, Regular, and Large.

MK-1050 Cable Prep Repair Kit for Crimping Tools HCT/ACT

Used Tool Spindle for Davenport OS MS Machine Tool Spindle (Spring inside + Retaining & Tool Collars)

BAND-IT C00169 Banding Tool Features Tensions over 2,400 lbs of force and cuts off the tail of the clamp being formed Used to apply BAND-IT Stainless Steel Band, Galvanized Carbon Steel Band, BAND-FAST, general use band and miscellaneous strapping Drop forged tool with built in cutter Spring loaded gripper lever improves ease of use Blue, epoxy powder coated finish resists corrosive elements Product Description Standard BAND-IT Banding Tool. For use on band widths of 3/16" to 3/4".

Jensen Tools JTK-93 Inch Electro-Mech.

::Index::

::Index::

Jensen Tools JTK-93 Inch Electro-Mech.

PROTO 5849 1" DRIVE 26" LONG MALE/FEMALE PEAR HEAD RATCHET. AN EXTRA SAFETY FEATURE IS PROVIDED THROUGH THE USE OF A SPRING LOADED PELLET IN EACH MALE DRIVE PLUG THAT SNAPS INTO A HOLE IN THE DRIVE END OF THE SOCKET AND ACTS LIKE A RETAINING PIN. THE SOCKET STAYS LOCKED UNTIL THE PELLET IS DEPRESSED AND THE SOCKET IS REMOVED.

You are purchasing a used band-it C00169 banding hand tool with 2 packages of 5 count 1/4" buckles (C72005); 6 packages of 5 count 3/8" buckles (C72205); one unused 100 foot long spool of 0.020" thick, 1/4" wide, 316 stainless steel banding (C402) and one opened and used spool of originally 25 foot but now unknown length of 0.025" thick, 3/8" wide, 201 stainless steel banding (C20325). The tool was originally around $140, the 316 stainless steel spool of banding $180.

1 - BRUSH HOLDER SET BRH-040K1 - SWITCH SWH-0192 - BRUSH/SPRING/CAP #352572 - CLAMP SCREW SRW-1412 - SHOULDER SCREW SRW-3211 - HEAT GUN STAND BSY-0052 - NOZZLE SCREWS SRW-349

RAB Lighting FF100W High Pressure Sodium HID Future Floodlight, ED17 Type, Aluminum, 100W Power, 9500 Lumens, 120V, White

Marson 39120 Body for HP-2 Riveter.39120 Body (Item 1) includes the 39132 Spring (Item 13) and 39133 Retaining Pin (Item 14).

Marson 39133 Torsion Spring Retaining Pin.Item 14 on HP-2 Parts List

Dayton 4CA22 chipping hammer Tested, does work, no bits included, bit retaining spring is broken, see picture. Manufacturer specifications: Stroke Length 2-11/16" Average CFM @ 15 Second Run Time 6.00 CFM @ Full Load 24.0cmf Air Inlet 3/8" Min. Hose 3/8" Overall Length 14" Required Pressure 90 psi Weighs 15.5 lbs.

420 Stainless Steel Spring Pin, Plain Finish, 1/8" Nominal Diameter, 1-1/4" Length (Pack of 100) Product Features

::Index::