reverse clamp for sale, brand-new and used.

Customer Service Hours: 9:00AM to 5:00PM EST M-F

Size: 17"W x 12"H Quickly and easily clamp onto tables from 1/4" to 1-7/16" thick

P6KE6.8CA TVS DIODE Transient Voltage Suppressor Bi-directional.50pcs

1.5KE56A 1.5KE56CA TVS 1500W Voltage Suppressor.10pcs

P6KE220CA TVS DIODE Transient Voltage Suppressor Bi-directional.20pcs

1.5KE6.8A 1.5KE6.8CA TVS 1500W Voltage Suppressor.20pcs

Lot of 10 - AUIPS6041(G) INTELLIGENT POWER HIGH SIDE SWITCHES Rds(on) 130mOhm max. Vclamp 39V I Limit 7A Open load 3V / 0.22A

RJ45 NEW IN BOX CAT5 LAN CABLE METER SC8108 NETWORK TESTER LENGTH MEASURE

RP SMA panel mount female blukhead&nut with extended dielectric&so

50 Ohm Reverse SMA Male,Straight ,Crimp Attachment for LMR240

This this classic machine is in fine working condition. It has a multi-speed power feed table and quill along with a high and low speed selector for each speed adjusted at the pulley along with a forward and reverse selector . The table is in great shape with only one tiny divot from a drill bit.

Vertical Mitering Band Saw Model VW-18 Series II

HERE IS A NEW SPI BUTTON INDICATOR CLAMP (SNUG)_.THE SAME CLAMP THAT WORKS WITH A STARRETT BUTTON INDICATOR SET 196 , READY TO USE WITH YOUR INDICATOR. THE CLAMP TAKES A 5/16" ROD ON ONE END AND THE INDICATOR END TAKES 1/4" WHICH IS THE SIZE OF A BUTTON INDICATOR SHANK. ALSO CAN BE USED WITH CHAIN CLAMPS FOR REVERSE ALIGNMENT.

HERE IS A NEW SPI INDICATOR CLAMP (SNUG)_.THE SAME CLAMP THAT WORKS WITH A STARRETT MAG BASE 657, READY TO USE WITH YOUR INDICATOR. THE CLAMP TAKES A 1/4" ROD ON ONE END AND THE INDICATOR END TAKES 1/4" WHICH IS THE SIZE OF A BUTTON INDICATOR SHANK. ALSO CAN BE USED WITH CHAIN CLAMPS FOR REVERSE ALIGNMENT IF RODS ARE CUT TO 1/4" .

You are bidding on one (1) used Mitutoyo Micrometer Head # 152-391 The unit is in working order and turns smoothly. It has some cosmetic scratches on the far side of the body opposite the measurement scale which would normally never be seen once installed. There is some light surface wear on the end face of the knob around the thumb wheel.

SpecsMechanical Micrometer Heads; Minimum Measurement (Inch): 0; Minimum Measurement (Decimal Inch): 0.0000; Max

LOT OF 4 NEW DE-STA-CO WORKHOLDING CLAMPS --- DE-STA-CO #247-U - 1000 LBS CAPACITY - VERTICAL HANDLE TOGGLE CLAMP --- DE-STA-CO #609 - 300LBS CAPACITY - PUSH - PULL CLAMP --- DE-STA-CO #624 - FLUSH MOUNT - REVERSE ACTION - 700LBS CAPACITY --- DE-STA-CO #202-U - 200 LBS CAPACITY - VERTICAL HOLD TOGGLE CLAMP --- ALL NEW --- I WILL COMBINE SHIPPING

ORBITAL SHAKING INCUBATOR 24flask Business & Industrial Healthcare,Lab Equipment Shakers