reverse clamp for sale, brand-new and used.

(1) MODIFIED REVERSE ACTION ANGLED TWEEZERS, 7-1/4" HAND CLAMP / SQUEEZE-TO-OPEN TWEEZERS WORKHOLDING VERSATILE DELICATE-WORK TOOL, INSULATED HANDLE Used and in very good condition. 7-1/4" Hand Clamp Tweezers for delicate work and for small screws and parts. Modified Angled Reverse Action Tweezers Workholding Clamp Tool.

1. Introduction Safe and Time Saving Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while ETCR1000C uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clampi

Included are one 24 position connector housing and one cable clamp assembly with screws and 4 different sized clamp blocks as shown in the photos. Shell size 23. New surplus from an engineering lab.

Brand new in the box. SHIPS FREE ANYWHERE IN THE US! Features and Specifications Range on Increasing Pressure

Schumacher SSC-1500A-CA Ship N Sore 15Amp / 12V Output

1.5KE300A 1.5KE300CA TVS 1500W Voltage Suppressor.50pcs

Non-contact Phase Detector(DYZX-2) I.Feature: phase check, line check, simple voltage check and break point locating

This listing is for one (1) unused/new Fluid O Tech Brass Rotary Vane Pump with bypass valve PA3501X. A new clamp ring is included with the pump. These pumps are from a beverage equipment sales and service company liquidation.

PROCON SERIES 2 CHEMICAL PUMP - 102A100R11XX Custom built by Procon 8/14; customer could not wait to get it so he bought a used one. Built to pump chemicals, specifically insecticide for use in a horse barn. Selling for same price as on our website.

I have Thousands of Manuals for Metal Working, Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information.

I have Thousands of Manuals for Metal Working, Wood Working and Fabrication Machining. Please just ask if you are looking for a hard to find Manual. It would be a pleasure to get your Machine Up and Running Again through this Invaluable Information.

How to Run a Lathe: How to Erect, Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19, by O’BRIEN BROTHERS J.J. O’Brien and M.W.