rock drill oil for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

Offered here is a heavy cast iron In-Line Rock Drill Oiler marked as being manufactured by the Gardner-Denver Company. Measures 12.0 x 5.0, weighing in about seven pounds or so. Likely circa 1930's, this would have been used in the rubber air hose between the air compressor and the rock drill itself.

RECONDITIONED MODEL BLUEROCK Magnetic Drill BRM35-A RECONDITIONED

This is a new unused mrd-9 rock drill. here are the specs. shows some scratches but it is new.

For sale; foot (drill) yoke fits all Pionjar models and Atlas Cobra 148/149/248, Cobra-combi, Cobra standard and Chicago Redhawk. Not a genuine Atlas copco part. I have to replace just about every foot yoke on the pionjars I buy because they take so much abuse.

T51-107-835-828 Saxum 5" Drop Center Rock Drill Bit ITEM DETAILS This is a new/unused Saxum 5 inch drop center drill bit. This drill bit has been in storage and the condition is as shown in the pictures. The item itself is unused and still in the original oil-protected bag.

The Stanley HD08 Hammer Drill is a rotary, percussion tool for drilling in rock, concrete, or masonry using 1/4 to 1 inch SDS Plus type bits. The HD08 can also be used for drilling in wood or steel by turning percussion off and installing an optional chuck adapter. This looks like a good drill hoses and fittings are missing.

Vintage Rock Oil Gold Silver Mining Well Drill Bit Tool 81-1/2" Long Vintage pneumatic drill long hardrock drill bit. 81-1/2" long. Has a bore hole through the shaft to holes at the bit head for air to blow dust.

DRILL-EASE Paper Drilling Lubricant. One package containing six DRILL-EASE sticks. Each stick consists of a specially-blended wax composition, plasticized with mineral oil, and containing film strength additives.

JACOBS 3/8" DRILL CHUCK W/ TAPERED SHAFT THD 5/8-16. THE TAPERED SHAFT IS ABOUT 1/2" AND TAPERS TO 9/16" AND IS 2-1/2" LONG TO WHERE THE TAPER ENDS. THE CHUCK TURN STIFF, PROBALY NEEDS MORE OIL OR CLEANING.

The Model: AUS-250 - GHD Hammer Drill weights 33 lbs. It is designed for heavier industrial use, portable, and powerful utilizing a 51 cc two cycle engine. The hammer has three use positions; 1.

The Model: AUS-125-GHD Hammer Drill only weights 13 lbs. It is very small, portable, and powerful utilizing a 22.6 cc two cycle engine. The hammer has three use positions; 1.

How It Works While the amazing Cold Weld™ Electronic Spark Deposition Technology is very simple in function, here is a technical overview to better explain the process. 10-300 volts of direct electric current (DC) is generated from 120 VAC (standard wall outlet current) and is stored in a series of capacitors within the equipment.

Drill size 7/8" to 1-3/8"   Used a couple of times with cutting oil still like brand new

A complete vintage Delta JET-LOCK fence. This sale is for one (1) fence of your choice from those pictured.