This is a new ENERGY HYDRAULICS tie rod, double acting hydraulic cylinder. The cylinder has a 4 inch bore diameter and a 24 inch stroke. It features a max pressure of 3,265 psi.
Drive Chucks The Vacuum Power Mixer Plus is equipped with a low-speed (430 RPM) Drive Chuck for vacuum-mixing of plasters, stones, die materials, investments and alginates, with the Vac-U-Mixer (200 mL, 300 mL, 500 mL, 875 mL or 1200 mL size) and Flexible Vac-U-Mixer (350 g or 650 g). The Combina
This is an original connecting rod for I believe a 6hp John Deere E hit and miss or throttle governed gas engine. It may fit other models or sizes so please do your homework to be sure it fits your application. It is in good condition with no cracks, breaks, or repairs of any kind.
Delta Milwaukee Switch RodReproduction Parts for Vintage Delta Drill Press. Description:This listing is for a NEW-REPRODUCTION Switch Rod only, for Vintage Delta Drill Press with built-in switch motors found on most Delta machines, (Drill Press, Bandsaw, Scroll Saw, etc.). Made of bent aluminum rod, measures approximately 17" long, complete with finger loop and toggle switch kerf/slot.
Hang ceiling wire & jack chain, threaded rod and eye lag screws. Our hardware is designed for the most efficient, secure and cost effective solution. High quality all steel construction Threaded and non-threaded holes to accommodate jack chain, ceiling wire or threaded rod APPLICATION Vertical Overhangs Hammer-on Threaded Rod Powder Actuated Eye Lag Screws Threaded Rod Pressed Beam Clamps
ebay template YOU ARE BUYING ONE PHD 16020-2-0001 ROD ESCAPEMENT 3/4" BORE & STROKE. ROD END OPTION: FLATS AND THREADED HOLES 4 SIDES AND ENDS, CAP OPTION: STANDARD CAP. THE PHD SERIES 160 DOUBLE ROD ESCAPEMENT PROVIDES A SIMPLE, RELIABLE MEANS TO ISOLATE AND RELEASE PARTS FROM VARIOUS TYPES OF FEEDING MECHANISMS.
ebay template YOU ARE BUYING ONE NEW PHD 13610-1-0102 ROD ESCAPEMENT 3/4" BORE & STROKE. ROD END OPTION: FLATS AND THREADED HOLES 4 SIDES AND ENDS, CAP OPTION: CAP WITH FLOW CONTROLS AND STROKE ADJUSTMENT. THE PHD SERIES 160 DOUBLE ROD ESCAPEMENT PROVIDES A SIMPLE, RELIABLE MEANS TO ISOLATE AND RELEASE PARTS FROM VARIOUS TYPES OF FEEDING MECHANISMS.
Our 16 person locker accommodates 16 users in only 69" of floor space andare compact, yet efficient. The spacious box openings are perfect for storing folded clothes, purses, bags, books or other personal valuables. Includes a 45" coat rod.
3 used sucker rod wrenches...all made by Petol....2 older and 1 newer....1 marked MONARCH.... 1 repaired with bolt instead of pin....3/4 & 7/8 rod stamped on 1....all appear to be the same size...except for length.....please look at photos for details as I am not familiar with these
This is a Nice Original Connecting Rod, ( With ROD CAP ) For The 1 1/2 Hp Fairbanks Morse, Hit & Miss Or Throttle Governed Gas Engines. I think This Would Be correct for The Earlier Z Engines...... This is in good Condition, with nice Original Patina, With A Nice combination Of grease, rust, & Paint It would be A good Candidate for A survivor engine that is missing one, Or Can Easily Be Cleaned & Painted !!!!
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.