ServoCity Linear Servo Motor 25lbs. Thrust Linear Actuator 2" stroke, US $100.00 – Picture 0

ServoCity Linear Servo Motor 25lbs. Thrust Linear Actuator 2" stroke, US $100.00 – Picture 1

ServoCity Linear Servo Motor 25lbs. Thrust Linear Actuator 2" stroke, US $100.00 – Picture 2

ServoCity Linear Servo Motor 25lbs. Thrust Linear Actuator 2" stroke, US $100.00 – Picture 3

Servocity Linear Servo Motor 25lbs. Thrust Linear Actuator 2" Stroke

US $100.00

Haifa, default, Israel
Jan 29th

Open on mobile:
QR code

Item Description You are bidding on new, never used, 25lbs. 2 inch stroke 2 inch/sec speed LINEAR THRUST ACTUATOR by ServoCity. The controller sold AS IS. You get what you see. The photos are the actual item. The linear actuator was never in use. It has little scratches and tiny marks, nothing serious, caused by not very accurate storage. It was never fallen or damaged in any way, though. Look at the photos. Original price - 129.99$ US. The actuator was originally purchased from ServoCity website - https://www.servocity.com/html/25_lbs__thrust_linear_actuator.html Some specs from official website: Move up to 25 lbs for under $130! Our heavy duty linear actuators can be used in place of pneumatics and hydraulics. The heavy duty linear actuators are driven by high torque brushed DC gearmotors coupled to an ACME screw to create a linear drive. The ACME screw provides efficient linear thrust that can handle loads in both the pushing and pulling orientation. The linear actuators can handle an incredible amount of static load and will hold position even when power is removed. The fixed limit switches at each end of the actuator will cut power when tripped to prevent over-run. Each actuator has a built-in potentiometer which can be used for positioning feedback if your application requires. The all aluminum construction with metal drive gears ensures tremendous durability and reliability. We offer them in six stroke lengths from 2 inches up to 12 inches. Extension shaft is .785” diameter. Mounting points are 5/16” diameter and bolt up directly to our optional mounting brackets. ROHS and CE listed. Operating Voltage: 6.0-12 Volts DC Operating Temp. Range: -26 to +65°C -14.8 to +149°F Operating Speed (12V): 2.00” second at No load Operating Speed (12V): 1.37” second at Max load Dynamic Thrust (12V): 25 lbs. Thrust Static Load: 500 lbs. Current Drain (12V): 800ma operating No load Current drain (12V): 3.8A operating full load Current drain (12V): 15A at stall (Warning: Damage can occur at stall) Motor Type: 3 Pole Ferrite Potentiometer: I0K Gear Ratio: 5:1 Ratio Gear Type: 4 Metal Gears Connector Wire Length: 24" Recommended Fuse: 5amp inline IP Grade: IP 65 - total dust protection, water resistant Duty Cycle: 25% (25% on, 75% off) Housing Material: Zinc Alloy Lead Screw: 3mm pitch, single thread All you need to do in order to get your actuator up and running is apply 6-12VDC to the positive (red) and negative (black) wires. You do not need to do anything with the potentiometer wires (Blue, Yellow, White). The potentiometer wires are only needed if you are building a system which requires you to know the exact position of the actuator piston. For normal operation, we recommend purchasing the switch above and wiring the switch according to the schematic. Payments: I prefer payment via PayPal. Contact me: I make every effort to accurately describe each item we sell and to give buyers the information needed to bid with confidence. Returns: The controller sold AS IS. No returns. Shipping: The actuator will be super-well packed and shipped within 2 business days. I'll provide photos of the package. You have 2 options - regular airmail with tracking, 1-3 weeks - 12$ US or Expedited mail (about 20 dollars, depends on the destination. Send me a message - I will reply shortly). Local buyers - are welcomed, contact me for shipping charges, probably it will be a couple of dollars.

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“The linear actuator was never in use. It has little scratches and tiny marks, nothing serious, caused by not very accurate storage.It was never fallen or damaged in any way, though.Look at the photos.”