shaft sleeve for sale, brand-new and used.

FHN Industrial Sells . . .

FOR SALE IS A USED FSI BLIND RIVET TOOL AND ACCESSORIES. THIS MILITARY SURPLUS KIT DOES INCLUDE THE PT-100 RIVET TOOL; THIS TOOL HAS BEEN TESTED AND WORKS! INCLUDED WITH THE SET ARE THE MAIN TOOL, PULLING HEADS, SLEEVE & PULLER SHAFT!

(one) pressure reactor, mixer, DCI, 140 gallon, all wetted parts are made of inconel 625, all other stainless parts are 304. 32" inside diameter, 41" straight down the sides 45" to bottom center, 51" from top of inside lid to bottom. 9-3/4" center top opening that mixing housing is attached to.

Century ORM5458 MotorSpecs: Item Type: Permanent Split Capacitor HP: 1/3 - 1/6 RPM: 1075 V: 208-230 Amps: 2.0 Hz: 60 Phase: 1 Frame: 48 Enclosure: TEAO Mounting: Stud Motor Diameter: 5.6'' Motor Length (Minus Shaft): 4-1/8'' Shaft: 1/2'' x 6-11/16'' Rotation: Reversible Service Factor: 1.0 Bearings: Sleeve Thermal Protection: Automatic Max. Ambient Temp. (C°): 60 Insulation Class: B Requires a 7.5 MFD 370V Capacitor - Part # 7.5H

DAYTON 3/4 HP, CAPACITOR START MOTOR3450 RPM, 115/230 VOLT, 60Hz, 11.8/5.9A, 1 Ph, 48 FRAME Used - Very cleanSleeve bearings, Resilient basethermal protection/manualRotation - CW/CCWShaft - 1/2" X 1 1/2", 3" high

Product returnBox has been opened. contains the pump as pictured and a manual, no other parts. ***NON-AUTOMATIC - Requires Float Switch or Controller***

The current item is a new 99.5% alumina ceramic crucible with capacity of 500 ml.

The current item is a piece of new 99.5% alumina ceramic thermocouple protective tube with dimension of: OD 1/2" x ID 5/16" x Length 24".

The current item is a new 99.5% alumina ceramic tube with dimension of: OD 2" x ID 1.7" x Length 48".

FOR SALE IS A USED FSI BLIND RIVET TOOL AND ACCESSORIES. THIS MILITARY SURPLUS KIT DOES INCLUDE THE PT-100 RIVET TOOL; THIS TOOL HAS BEEN TESTED AND WORKS! INCLUDED WITH THE SET ARE THE MAIN TOOL, PULLING HEADS, SLEEVE & PULLER SHAFT!

FOR SALE IS A USED FSI BLIND RIVET TOOL AND ACCESSORIES. THIS MILITARY SURPLUS KIT DOES INCLUDE THE PT-100 RIVET TOOL; THIS TOOL HAS BEEN TESTED AND WORKS! INCLUDED WITH THE SET ARE THE MAIN TOOL, PULLING HEADS, SLEEVE & PULLER SHAFT!

FOR SALE IS A NEW RAM CENTRIFUGAL PUMP SHAFT SLEEVE. MILITARY SURPLUS! THE PART NUMBER IS 55-22219-20 AND THE NSN IS 4320006331272.

Call or Email For A Lead Time / Shipping Quote Compressor Information

MADE IN THE USANOS DAYTON CAPACITOR START MOTOR 3K224C REVERSIBLE3/4HP

I WORK AT A PLUMBING SUPPLY COMPANY AND WE ARE SELLING OFF SOME OLDER INVENTORY. THESE PARTS EITHER FIT A RIDGID 300 OR 300A PIPE THREADING MACHINE OR THE 535/535A. THE PARTS ARE IN GREAT SHAPE BUT A FEW HAVE SOME LIGHT SURFACE RUST FROM BEING ON THE SHELVES FOR AWHILE.

Product Name, EP Externally Pressurized Condition: New Never put into service Type: Rotational and linear translating bearing Linear Compliance: 2.50" +/- 1/2 Shaft Diameter: 4.00" Housing Diameter: 6.00" Mounting holes on face of housing and stator Air supply pressure max 100 PSI Radial load capacity, 400 lbs Stator Material: Mild Steel, Sleeve material 660 Bronze Originally designed to be used as a lathe tailstock bearing, for optical quality machining PRICE IS FOR EACH

Signstek 2 Pack P6040 40 MHz Oscilloscope Probe for Rigol Atten Owon Siglent

Gates QT 1. QT-Type Bushing, 1" Bore

Gates 1610 30MM Taper-Lock Bushing, 30mm Bore, 1.0" Length, 1.6" Max Bore