shaft spindle for sale, brand-new and used.

Quinn Process Equipment Company (QPEC) - No. 5 Multiple Flotation Process SystemNever used… Complete with original packing material in-place The units are used in mineral, chemical, environmental, and industrial applications requiring the efficient dispersion of fine air or gas bubbles in slurries or liquids. The units are designed for continuous trouble-free 24-hour operation and to handle fine and coarse-abrasive slurries.

Denver Model D-12 Laboratory Flotation Machine Suspended type mechanism including totally enclosed antifriction spindle bearing, stainless steel shaft, stainless steel standpipe with air control valve Used for laboratory flotation and attrition scrubbing testing Mechanism is supported on a spring balanced movable arm that is raised or lowered on a column by a hand crank through rack and pinion bearing and can be locked at any desired height.

Logan 11 1/2" lathe head stock. Includes spindle and bearings. Don't know the condition of the bearings, but they turn smoothly, no play, no rough spots.

UP FOR SALE IS A USED HOBART MEAT GRINDER "ORIGINAL HEAD DRIVE ASSEMBLY" WE ARE PARTING OUT THE MACHINE AS IT HAD NO PROBLEMS THE IS FOR THE HEAD DRIVE,THE BELT DRIVEN PULLEY THAT DRIVES THE SPINDLE, THE THUMB KNOB AND THE SQUARE SPINDLE-WORM THAT GOES INSIDE THE SHAFT AS WELL AS THE SCREWS, PIN AND WASHER TO PUT IT BACK TOGETHER WITH. THIS IS THE PART THAT YOUR MEAT GRINDER ATTACHMENT FITS ON TO THAT IS ON THE FRONT OF YOUR POWER

This came out of a drill spindle power head. Chuck works well but I don't have the chuck key. What you see is what you get.

Insert Spindle for Series 57 tool post grinders. This will fit either the 5T-200 Spindle or the Type "T" from older machines. This is a Dumore compatible part, but probably not made by Dumore.

var itemNumber = window.ebayItemID ?

This is an add-on 3-spindle hinge-bore head that has never been used. It is designed to be added to a line-bore machine head when boring the cup and both side holes for European hinges. The spindle spacing for the drive side is on 32mm divisions, with one spindle being the drive and the other being the idler to hold alignment.

This is a pulley # 560-196 and spindle. 3/8" internal width. Came from a 6" Atlas Metal Lathe Model 10100 Serial #002768 with a 1 5/8" gap between bed rails.Made by Clausing Corp.

discount

Very nice MTI NSX-180 Dicing saw in fully operational condition, and is now being used for production processing of Silicon dioxide wafers. We can provice a video with audio available for viewing or you can come to our facility and view this machine. This machine comes without warranty and is being sold on an "as-in-where-is" basis.

Dumore series 57 Tool Post grinder for 9" to 20" swing lathes.3/4 HP universal motor, which can run on DC or AC up to 120V. Motor armature and stator are wound so motor will always spin the same direction, independent of the polarity of the applied voltage. (I have tried 24V DC and 120V AC)This 15,000 RPM motor, with large and small pulleys, can turn the spindle from 4600 RPM to 42,500 RPM.

Up for bid is a used groove micrometer. It turns very smoothly. There is nothing wrong with it.

Title of your page goes here 1941 MACHINE SHOP TOOLS LATHE MILL JIGS FIXTURES FOUNDRY GEAR CUTTING      This is a 568 page, 5 3/4” x 8 1/2”, hardcover book titled The New Encyclopedia of Machine Shop Practice.   The book was edited by George W. Barnwell Professor of Production Practice Stevens Institute of Technology and was copyrighted and published in 1941.

DM-MOTIN

DM-MOTIN

DM-MOTIN

The Bill Burke Signature Series Husky 10 was selected by a panel of international journalists as a product most likely to succeed during the 2008 SEMA Show in Las Vegas, Nevada; Superwinch received a SEMA Global Media Award for this accomplishment. The Superwinch Husky Series - We dare you to find tougher winches. With the rugged worm-gear drive mechanism and 4.2 horsepower Series Wound motors, the Husky 10 is an off-road champion in its own right.