shaft spindle for sale, brand-new and used.

Was removed from a new Milwaukee #5194. Also will fit a Milwaukee #5192 and #5196. This was used with a 1/4" collet and nut and may be used in other applications.

NEW Deprag Stainless Air-Vane Motor 67-066, 0.8 HP, 300 RPM, 30 SCFM, 504 $699 THIS MOTOR SALES FOR $2400 NEW. YIKES! This is new in the box.

Bridgeport Drawbar Wrench with Brass Hammer Head Especially for use on Bridgeport mills and similar machines Loosen and tap your drawbar to release the R-8 collets and toolholders from the spindle without damaging your drawbar 3/4" box wrench also fits head, knuckle and ram bolts, also useful on the hex shaft of 6" Kurt Vises 7/8" box wrench fits the nuts on your hold down clamps Even tradesmen using power drawbars like a Wrammer on their mills Made in USA

One owner Milwaukee Heavy Duty Electro Magnetic Drill Press 4270-20. The drill press has some scuffs and scratches. It has all the accessories in the case.

Dumore series 5 Tool Post grinder for 9" to 20" swing lathes. Compatible with Series 57 systems. Model 8534 1/2 HP universal motor, which can run on DC or AC up to 120V.

Dumore No. 5 Tool Post grinder for 9" to 20" swing lathes. Compatible with Series 57 systems.Model 8010-210 1/2 HP universal motor, which can run on DC or AC up to 120V.

This motor was purchased for my small manual lathe because my main spindle motor stopped. After purchasing this motor to replace it we had replaced a capacitor on the original motor before we ever got this one completely installed. Tried to send this back, but we had scared the shaft when we took the pulley back off.

quill length 360mm, diameter 73mm diameter, 27 teeth spline shaft 360mm long from the top of the quill, 1.25" diameter, 6-flute Morse #4 socket 145mm long, 71.36mm diameter overall length 34-1/4" Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever FedEx or USPS quoted that's what will be on your invoice.

K2 CNC Machine Frame PC Router, Drivers, PSU, Stepper Motors & B.O.B. I purchased this super nice machine frame, motors, drivers, breakout board, power supply, router, and software packages for a great simple stable PC in a killer enclosure – just under 4 years ago for work here at Fretsong Guitars. The system has never been put into service – ALL the hardware is brand spankin’ new.

Milwaukee Part 43-34-0785 Inner Flange, and Part 38-50-6095 Spindle I found the parts in a lot at auction There is no markings on the parts, but the box was marked 43-34-0785, I googled and found on Milwaukees page that it is used in a 6184-01 Cut-Off Machine. I made the conclusion that the shaft was for same model, so I took the parts number from the parts list. Look carefully on pictures Posted with eBay Mobile

This is a pull down straightening press I built to straighten a precision grinding spindle. It's a copy of one I saw on youtube and it pulls straight without the deflection you get when pushing a shaft in an H-frame type press. The carriage moves on wheels to direct the pulling force where you need it.

DM-MOTIN

Powermatic 1150A Drill press spindle and quill assembly.Includes new bearings, collar and spare 6004Z top bearing. Journals on shaft are worn and will need repairing. Please see pictures.

This is retired equipment still in a good state. Item is located in DeKalb, Illinois.$500 is required immediately. Balance must be paid 48 hour later at point of collection.

Dumore series 57 Tool Post grinder for 9" to 20" swing lathes.Model 8526 3/4 HP universal motor, which can run on DC or AC up to 120V. Motor armature and stator are wound so motor will always spin the same direction, independent of the polarity of the applied voltage. (I have tried 24V DC and 120V AC)This 15,000 RPM motor, with large and small pulleys, can turn the spindle from 4600 RPM to 42,500 RPM.

Vintage Linear Potentiometer SP-1 USSR / Soviet Made 10 kOhm / 1W 3-20 Spindle Curve - A Relative Shaft size: 6mm lenght @ 6mm diameter NOS This auction is for LOT OF 10 PIECES!