Imer Minuteman Concrete Multimixer - $475 This mixer is in god working condition. This Imer Minuteman portable mixer is perfect for small jobs requiring a concrete mixer, stucco mixer or cement mixer. Mixes 275 lbs., 5 cubic-feet of mortar, stucco, grout, or concrete in less than 5 minutes.
PLEASE READ DESCRIPTIONS AND AFTER PURCHASE PLEASE DO NOT LEAVE 1'S OR 2'S ON SELLER RATING, IF YOU ARE NOT HAPPY WITH A PURCHASE PLEASE CONTACT ME FIRST. Triple R Specialty Tools g2-xhd pipe groover in good used condition, all parts were greased and turns like it should, older moder, specs below on newer model. What you see is what you get.
CASTER SWIVEL BEARING FOR CLARKE B2 EDGER PART # 51128A NOTE: This edger takes ONE bearing per shaft (two bearings total for each sander). This is not the same bearing as is used in the wheels. Each wheel takes two bearings, part # 50740A, which we also carry.
PAIR OF SWIVEL BEARINGS FOR CLARKE EZ-8 DRUM SANDER PART # 51194B This is one pair of the horizontally-mounted bearings that carry the caster assembly; not the bearings for the wheel itself. In our experience, these bearings need replacement more often than any other part on the EZ-8. Don't let it go too long, or the caster wheel will wea
The MK-101 Series of saws features a powerful, high torque motor for improved performance to tackle all cutting jobs. The one-piece unitized steel frame is built for increased durability. The covered linear guide bar system provides precise cutting on the entire length of the cut.
I just finished my last tile job. The unit performed flawlessly!! TIME FOR YOU TO MAKE OR SAVE SOME MONEY :-) Returns will not be accepted as buyer will have the opportunity to test/use equipment at the time of pick-up!
Description: The MK-101 Pro series has all of the features of the MK-101; what makes the Pro Series unique is the heavy-duty 1-1/2 HP motor, extended table and an extended length of cut to 24-Inch. The permanently lu
My photos are of the clutch disassembled & small pieces are all together on the counter top. The clutch is really simple with only eight parts.The pulley part #9 is on the chair. Then all the parts are assembled together.
ANTIQUE FLAT BELT PULLEY WHEEL FINISH VERY RUSTY NO CRACKS has 502 t cast in one spoke 23 INCHES IN DIAMETER X 4.25 INCHES WIDE SHAFT SIZE IS APPROXIMATELY 1 3/8 INCH WITH KEY SLOT
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
