gainexpress A revolutionary Protractor provides angle measurement within ±180° (0 ~ 360°) range in wide variety of application. Featuring large and clear LCD with Backlight and results always in upright position at any given angle. If the alarm function is enabled, the inclinometer wi
Heald ID Grinding Spindle Quill No. 8 BS Spindle Mount This Heald Number 47 Taper Spindle Mount Wheel Spindle Features a 7/8 inch diameter shaft x 2 inches long to wheel mount. 3/8 Inch wheel retaining screw diameter (No screw included).
Heald ID Grinding Spindle QuillNo. 8 BS Spindle Mount This Heald Number 47 Taper Spindle Mount Wheel Spindle Features a 1/2 inch diameter shaft x 2 inches long to wheel mount. 1/4 Inch wheel retaining screw diameter.
Heald ID Grinding Spindle Quill No. 8 BS Spindle Mount This Heald Number 47 Taper Spindle Mount Wheel Spindle Features a 7/8 inch diameter shaft x 2 inches long to wheel mount. 3/8 Inch wheel retaining screw diameter.
Heald ID Grinding Spindle Quill No. 8 BS Spindle Mount This Heald Number 47 Taper Spindle Mount Wheel Spindle Features a 1 inch diameter shaft x 2-1/2 inches long to wheel mount. 5/8 Inch wheel retaining screw diameter (screw not supplied).
MANDRELS REINFORCED WITH 1/4" SHANK & 1/4" SCREW LARGE HEAD DIAMETER ROTARY MANDREL FOR DREMEL & FOREDOM TOOLS Large Screw Mandrels Reinforced with 1/4" shank have reinforced shoulder (5/16" Diameter) and 1/4" Screw to hold wheels. Mandrel is made of Steel and finished in Nickel an
Generic riser block kit re-machined to fit the Delta 14" bandsaw with a 15/16" round upper guide post. Cross references and interchanges with Delta model 28-284 riser block kit 15/16" Diameter Guide Post now reversible for flat or radius end locking screws Colors may vary from picture. 15/16" guide post has a flat milled on one side and a round groove on the other for both types of height adjusting screws, (flat or round end), to bear on and to align the upper guide bracket.
Drive/Contact Wheel 6”OD x 1-3/4” wide Precision machined from aluminum. It has a 3/4” bore and comes with a special self-tightening insert. Please see listing photos for more details.
If you'r working on a Selectric you need a Cycle Wheel/Turning Wheel. There are many adjustments that require you to hand cycle the machine and the cycle wheel screws into the RH end of the operational shaft so that you can do this. This one has a knurled steel knob.
If you'r working on a Selectric you need a Cycle Wheel/Turning Wheel. There are many adjustments that require you to hand cycle the machine and the cycle wheel screws into the RH end of the operational shaft so that you can do this. This one has a plastic/glass filled knob.
If your working on a Selectric you need a Cycle Wheel/Turning Wheel. There are many adjustments that require you to hand cycle the machine and the cycle wheel screws into the RH end of the operational shaft so that you can do this. This wheel has a polished aluminum knob and 6-32 left hand thread so that the operational shaft can be turned in a counter clockwise direction.
This cycle wheel is made by me and has a 1 3/4" plastic knob and left hand 6-32 threads for screwing into the operational shaft of the IBM Selectric. I have used a less expensive knob than my other models but it's plenty hefty for the hand cycling job and long enough to fit into the op shaft while the machine is still in the bottom cover.
You are bidding on a brand new Desert Fox Variable Speed Gold Panning Machine Recover 50 times MORE GOLD with the Desert Fox Automatic Gold Panning Machine! ANYONE who prospects and pans for gold can tell you that
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
