shaft wheel for sale, brand-new and used.

Triumph NTC-950 + NTB-550 COMBO PACKAGE Free freight to anywhere in the lower 48 United States! Free Lift Gate service at delivery on all tire changers and wheel balancers! The best deal on the market.

I bought this item new, used it for maybe 10 minutes and realized the grinder shaft was bent. I sent this back to be repaired/replaced, and in the interim I had my floors professionally completed. The manufacture either replaced the machine or repaired it, actually believe they replaced it since the pictures I have of the original do not look the same, as the condition when I had it was poor and the condition they sent this unit to me looks brand new.

Hi, this is Don. I removed this set of wheel retainers from a very old grinder that was 10" stone, 1 hp, 440v, 3ph. It had a label that said, "Hisey", but I noticed the fenders were of the exact same construction as my antique 8" Cincinnati grinder, so I'm assuming that these parts may fit the old Cincinnatis as well.

Here we have my WEM Desk Top Hobby Center Grinding/Sharpening Wheel w/ Flexible Shaft Hand Tool Still going strong after all these years. I have no need of it now. It has a grinding wheel on one side, and on the other is where you can plug the rotary tool ( Like a dremmel ) It takes the same Tools as a Dremmel or similar tool.

For Sale! N REKORD MODEL 400 AUTOMATIC HSS,CARBIDE CIRCULAR SAW BLADE GRINDER (OC373)G (v (Made in Italy ) Comes with stones, blades and tooling ready to go!

This counter can measure to 9,999 feet.

This is the wheel assembly for a Milwaukee M4910-21 Paint Sprayer. It is used but is in good working condition. As you can see in the images it has some paint mist on it.

X-150 early entry saw for sawcutting control joints in freshly poured concrete floor slabs. This saw is used but in very good condition and product specs are as follows: Engine Motor manufacturer Subaru Motor spec EX13 Max output (As rated by the engine manufacturer) 3.2 kW / 4.3 hp Engine/motor RPM pos1:4000 rpm Cylinders 1 Number of strokes 4-stroke engine Cylinder displacement 7.69 cu.inch Cylinder bore 2.28 inch Cylinder stroke 1.89 inch Fuel

Tool has ben used ,but not very much it does have some scraches on top & side & alot on bottom but it still looks like NEW ,& more importantly works like NEW scraches on bottom came from trying to hold down when started alot of compression ALOT. Also the water attachment is missing dont know where but saw is complete n runs great!!!!!!!!!!!!!! ((((((THROWING IN A VERY NICE DEWALT HAMMER DRILL WITH LESS THAN AN HOUR OF RUN TIME WILL HAVE PICS POSTED TODAY!!!

I also have the blower wheel for this motor in another auction. BLOWER MOTOR, 2 SPEED, [ 208-230V, ] [ 50/60 HZ ] [ 1/2-1/10HP, ] [1PH ] [1724/1140 RPM ] [ CW ROTATION ] [ 56Z FRAME, [ 5/8" X 2-1/2" SHAFT ] HOBART & VULCAN BLOWER WHEELS: FLAT BACK A967, MB-165, # 26-1468 OR CONCAVE BACK A2848, # 26-2287 EITHER SHOULD WORK, SAME SIZE.

&n

Digital Protractor Inclinometer for patio furniture Angle Finder Industrial Tool

Brand New Stihl Ts 420 Cut Quick Concrete Asphalt Saw Machine pictured comes with manuals tool kit fiber blade (has original box) (no diamond blade) taken odor pictures TS 420 STIHL Cutquik®A 14” cutting wheel puts this cut-off machine in the big leagues of performance, efficiency and ease of use.DescriptionSpecificationsFeaturesReviewsAccessoriesSupport TS 420 STIHL Cutquik®Model FeaturesAA Caring for NatureZoomReduced-Emission Engine Technology - Caring for Nature The STIHL Inc.

Used Wheel Chair Motor with gear assy. NOTE: Not intended as a replacement for wheel chair. But as hobby use or battle bot Motor has been bench tested and runs fine.

Greenheck Vector H Isolation FAN VK-H-12-M30-X High Plume Laboratory Exhaust Blower Fan EXPLOSION PROOF PREMIUM EFFICIENCY3-PHASE INDUCTION MOTOR EQP III

This is the fan assembly from a tangential type blower unit.  The fan is constructed of aluminum end caps and 22 blades.  One end has a 10mm OD bearing pressed on.  There is a rubber grommet that accepts the bearing and has a groove so it can be pressed into a piece of sheet metal- this grommet is included with the blower wheel.  The other end has a rubber grommet with a hole just a touch under 5 mm.  Originally the motor drive