shoulder eye bolt for sale, brand-new and used.

Koch Industries Koch 105130 Forged Eye Bolt with Nut, 1/2 by 8 , Galvanized

Koch Industries Koch 106000 Forged Shoulder Eye Bolt with Nut, 1/4 by 2, Galvanized

Specifications Working Load Limit: 1,350 LBS Image of Specifications for Machine Eye Bolt - Stainless Steel"A" = 3/8" "B" = 1-9/16" "C" = 1" "D" = 3/4" "E" = 11/16" Description Machine eye bolts are often referred to as lifting eye bolts since they are commonly used as a connection point in lifting systems. Shoulder machinery eyebolts should always be used for angled lifts, because the shoulder gives it greater strength.

New, old stock, SHOULDER PATTERN EYE BOLT, w/ 3/4 X 2" Threaded Shaft from Shoulder cut. Outside eye diameter = 2.75", Inside diameter = 1.5", Total Length = 5 1/8". CAGE 31609 EYE BOLT, MFG 02/15/93 IN THE USA.

1/4" FORGED LIFTING EYE BOLT (Shoulder Pattern) with full shank thread to shoulder. Rated capacity considers a straight vertical lift. Always use caution when lifting.

This auction is for 4 brand new, never used or installed 1/2" shouldered eye bolts made of zinc plated steel. The threads are 1-5/8" long, 13 TPI. Over all length of the eye bolt is 4-1/16".

Geffen - Best deals on eBay NEW Koch 106080 Forged Shoulder Eye Bolt with Nut 3/8 by 6 Galvanized

M20 shoulder eye bolt with 30 mm of thread / 40 mm eye opening. Like new condition. Sold in sets of 4 ONLY., specs show 1.2 tons each of lifting 

SHOULDER EYE BOLT 316-NM STAINLESS STEEL 3/8" X 2.50" You Are Buying: One Shoulder Eye Bolt 316-NM Stainless Steel 3/8" X 2.50" ITEM # S0314-1006 SPECIFICATIONS:

These big machinery eye bolts came from a closed factory parts crib. They are 1 1/8 thread, 7 threads per inch. No documentation but they are USA made drop forged steel.

Chicago Hardware 5/16" x 2 1/4" galvanized eye bolt with shoulder, this eye bolt has 1 1/2" of threads and overall length is 3 5/8"

Forged 1/2"-13 Shouldered Lifting Eye Bolt Box of 10 Forged shoulder eye bolt with a 1/2-13 threaded shank. The shank length is 1-1/2" long with a ring I.D. of 1-3/16" and ring O.D.

*** PLEASE ALLOW C-MACK SUPPLY TO ADJUST YOUR INVOICE PRIOR

*** PLEASE ALLOW C-MACK SUPPLY TO ADJUST YOUR INVOICE PRIOR

Qty 6 Eye bolt with shoulder by Chicago Hardware, type 21. Bolts are all the same size (1/4" type 21), but 2 of them are darker and have a C5 code, while 4 have a D12 code (see pictures)

1/4" x 2” SCREW EYE BOLT (Shoulder Pattern). Do not use Screw Eye Bolts for lifting. Screw Eye Bolts do not have a rated capacity.