sink machine for sale, brand-new and used.

Parker Compumotor OEM750X Stepper Motor Driver - w/heat sink - CNC - Mach3 Removed from equipment, fully tested. Drive documentation is available on the web. Are you building a CNC machine ?

?????

Omron G3PB-215B-2-VD Solid State Contactor, Lot of (3)- These contactors are solid state and typically used where starting and stopping is done frequently, or when controlling an electric heating element with a dc signal and pulse width modulation. These were used in a semiconductor processing machine to control fluid temperature with electric heat. They are rated at 15 amps, 3-phase, and have a control signal of 12-24 vdc.

Commercial Grade Stainless Steel Washout Sink. Size: 43” x 119” inside dimension. 8" Deep in the front and sides and 16" Deep in the back.

About us Shipping

About us Shipping Payment

About us Shipping Payment

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4995.00 This is a 24"x 49" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4595.00 This is a 24"x 24" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

Brand new, never used 3/8" flush trim panel pilot router bit with 1 carbide flute and a 1/2" shank. Serves for plunge cutting through a panel usually to make a guided cut against a template or rough framing from the other side. These bits most often see use in cutting larger sink openings in already installed counter tops or where a laminate is placed over an existing sink opening in the counter base material.

This is a brand new, never used 3/8" cutting diameter flush trim straight router bit with a 3/8 inch bearing and two carbide flutes. Flush cut bits are used primarily for flush cutting edges to a template, guide or jig. The bearing at the end is of the same diameter as that of the cutting depth so that the cutters will clear all material outside any template the bearing rolls along.

This is a brand new, never used 3/8" cutting diameter flush trim straight router bit with a 3/8 inch bearing and three carbide flutes or blades for superior smoothness, speed, and consistency of cut. Flush cut bits are used primarily for flush cutting edges to a template, guide or jig. The bearing at the end is of the same diameter as that of the cutting depth so that the cutters will clear all material outside any template the bearing rolls along.

This is a brand new, never used 1/2" cutting diameter flush trim straight router bit with a half inch bearing and three carbide flutes or blades for superior smoothness, speed, and consistency of cut. Flush cut bits are used primarily for flush cutting edges to a template, guide or jig. The bearing at the end is of the same diameter as that of the cutting depth so that the cutters will clear all material outside any template the bearing rolls along.

This is a brand new, never used 1/2" cutting diameter flush trim straight router bit with a half inch bearing and 2 carbide flutes or blades. Flush cut bits are used primarily for flush cutting edges to a template, guide or jig. The bearing at the end is of the same diameter as that of the cutting depth so that the cutters will clear all material outside any template the bearing rolls along.

Dental Package - Emeryville, CA The following equipment is available for immediate sale and the space is also available. Equipment is in good condition. Most of the equipment is from 2006.

The pictures of item are still in package. The package is not re close-able. Tucker Safety 15 inch 5 Finger Glove Pair, Nomex Item code 22150 Sanitation: Every Tucker product is designed to inhibit the growth of bacteria and prevent scorching as well as absorption of liquids, grease and steam.