+ Post new Ad
SKODA Precision Heavy Duty Live Center - TAPER: 1 MT, US $440 – Picture 0
SKODA Precision Heavy Duty Live Center - TAPER: 1 MT, US $440 – Picture 0

Skoda Precision Heavy Duty Live Center - Taper: 1 Mt

US $440

  • Duncan, South Carolina, United States
  • May 24th
Open on mobile:
QR code
Create less thermal friction when turningFeatures The rotating spindle is extended right through the tapered shank. Two specially designed adjustable needle-roller bearings carry all radial loads. A heavy duty ball thrust bearing takes all axial thrust. Thermal expansion and shock loads are absorbed by a special compensator spring. Complete protection of bearings from the ingress of coolant dirt or swarf is provided by the built-in oil seal which also prevents loss of lubricant. Product Specifications Product Specifications Weight 1.10000 Brand SKODA Model # 310-105 Taper 1 MT Thrust Load — Weight Of Workpiece 200 lbs. Center Point Angle 60° Maximum Rotational Speed — Center Diameter 5/8" Spindle Diameter — Point Diameter — Point Type — Body Diameter 3/8" Largest Head Diameter — Head Diameter — Body Length 4-3/8" Comp Load Rate — Net Weight of Center 1.1 lbs. Length From Head To Tip of Point — Overall Length — Length From Gage Line To Tip — Morse Taper 1 Point Angle 60° Country of Origin CZECH REPUBLIC Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Directions

Similar products from Live Centers

Bison-Bial MT#3 Precision Live Lathe Center-.0003 TIR

Bison-Bial MT#3 Precision Live Lathe Center-.0003 TIR

  • Hamden, Connecticut, United States
  • May 25th
Bison-Bial MT#4 NC Quad-Bearing Live Lathe Center-.0002 TIR

Bison-Bial MT#4 NC Quad-Bearing Live Lathe Center-.0002 TIR

  • Hamden, Connecticut, United States
  • May 25th
#5 Morse Taper Talide Carbide Tipped Half Dead Center

#5 Morse Taper Talide Carbide Tipped Half Dead Center

  • Fowler, Ohio, United States
  • May 25th
Royal Products Live Center, MT4 - p/n10874

Royal Products Live Center, MT4 - p/n10874

  • New York, New York, United States
  • May 25th
# 4 Morse Taper Half (Dead) Lathe Center - Carbide Tipped U.S.A.

# 4 Morse Taper Half (Dead) Lathe Center - Carbide Tipped U.S.A.

  • Fowler, Ohio, United States
  • May 24th
NOS NEW Enco MFG CO Live Center with #1MT and Original Box ATLAS 6'' LATHE 824K

NOS NEW Enco MFG CO Live Center with #1MT and Original Box ATLAS 6'' LATHE 824K

  • Dearborn, Michigan, United States
  • May 24th
9.84" 250mm Bison Universal Pipe Live Center 8883-125-250 (GGG)

9.84" 250mm Bison Universal Pipe Live Center 8883-125-250 (GGG)

  • Dallas, Texas, United States
  • May 24th
Ritten - Bloomingburg O. Live Center (8D)

Ritten - Bloomingburg O. Live Center (8D)

  • Waverly, Ohio, United States
  • May 24th
ROYAL Versa-Turn Live Center - Overall Length : 7-15/16' Taper: 4 MT

ROYAL Versa-Turn Live Center - Overall Length : 7-15/16' Taper: 4 MT

  • Duncan, South Carolina, United States
  • May 24th
BISON Super Precision Live Center Point Length : Overall Length : 4.07''

BISON Super Precision Live Center Point Length : Overall Length : 4.07''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

  • Duncan, South Carolina, United States
  • May 24th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Quad-Bearing Live Center Point Length : 1-1/16'' Overall Length : 6-7/16''

ROYAL Quad-Bearing Live Center Point Length : 1-1/16'' Overall Length : 6-7/16''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-1/4''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-1/4''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938''

ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Oversized Carbide Point Dead Center - TAPER: 4 MT

ROYAL Oversized Carbide Point Dead Center - TAPER: 4 MT

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 1.231''

ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 1.231''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8'' Morse Taper: 3 MT

ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8'' Morse Taper: 3 MT

  • Duncan, South Carolina, United States
  • May 24th

People who viewed this item also vieved

Hardinge 3 Jaw Chuck For Stark Lathe

Hardinge 3 Jaw Chuck For Stark Lathe

  • Rensselaer, New York, United States
  • Jan 30th
Threaded M39x4 BackPlate/Adapter 6 Inch Lathe Chuck

Threaded M39x4 BackPlate/Adapter 6 Inch Lathe Chuck

  • Chino, California, United States
  • Jan 30th
4 " 4-Jaw Independent Lathe Chuck-New

4 " 4-Jaw Independent Lathe Chuck-New

  • Chino, California, United States
  • Jan 30th
(2) L.S. STARRETT CO. Toolmakers' Parallel Machinist Clamps NO.161-B

(2) L.S. STARRETT CO. Toolmakers' Parallel Machinist Clamps NO.161-B

  • Rochester, New York, United States
  • Jan 30th
used vintage detroit stamping clamp for welding

used vintage detroit stamping clamp for welding

  • Belding, Michigan, United States
  • Jan 30th
milling machine hold down work hold Tietzmann & 3 unknown adjustable mill bars

milling machine hold down work hold Tietzmann & 3 unknown adjustable mill bars

  • Elgin, Illinois, United States
  • Jan 30th
Valenite TG150 1-1/64" Machine Tool Collet

Valenite TG150 1-1/64" Machine Tool Collet

  • Wyoming, Michigan, United States
  • Jan 30th
Valenite TG150 5/8" Machine Tool Collet

Valenite TG150 5/8" Machine Tool Collet

  • Wyoming, Michigan, United States
  • Jan 30th
Erickson TG150 3/4" Machine Tool Collet

Erickson TG150 3/4" Machine Tool Collet

  • Wyoming, Michigan, United States
  • Jan 30th
Bemisine Adjustable Sine Plate 3-1/2 x 4 Inch: (Inv.13615)

Bemisine Adjustable Sine Plate 3-1/2 x 4 Inch: (Inv.13615)

  • Portland, Connecticut, United States
  • Jan 30th
Warner & Swasey 12in Face Plate 1676

Warner & Swasey 12in Face Plate 1676

  • Fort Worth, Texas, United States
  • Jan 30th
SOUTH BEND 2 1/4 ” - 8 FACE PLATE 5.5" DIAMETER

SOUTH BEND 2 1/4 ” - 8 FACE PLATE 5.5" DIAMETER

  • Baltimore, MD, United States
  • Jan 30th
MAG-MATE PNL0800, 660 Lb./In. Permanent Lifting Magnet Good USED Condition!

MAG-MATE PNL0800, 660 Lb./In. Permanent Lifting Magnet Good USED Condition!

  • Ogden, Utah, United States
  • Jan 30th
MACHINIST TOOL LATHE MILL Huot Drill Cabinet for Machinist Hobby Pocher Sherline

MACHINIST TOOL LATHE MILL Huot Drill Cabinet for Machinist Hobby Pocher Sherline

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of Machinist Mandrels for Work Holding k

MACHINIST TOOLS LATHE MILL Lot of Machinist Mandrels for Work Holding k

  • Morris Plains, New Jersey, United States
  • Jan 30th
Brown & Sharpe No 24 Milling Vise 4" Opening 7" Wide Jaws USA

Brown & Sharpe No 24 Milling Vise 4" Opening 7" Wide Jaws USA

  • Elgin, Illinois, United States
  • Jan 30th
Wilton bullet type swivel vise, 4"

Wilton bullet type swivel vise, 4"

  • Lewisville, Pennsylvania, United States
  • Jan 30th
Ralmike's round stock vise, 10-80 mm diameter capacity

Ralmike's round stock vise, 10-80 mm diameter capacity

  • Lewisville, Pennsylvania, United States
  • Jan 30th
Phase II 900-600 Parallel Set, 10 pr., 1/8" Thick

Phase II 900-600 Parallel Set, 10 pr., 1/8" Thick

  • Cape Neddick, Maine, United States
  • Mar 2nd
Brown and Sharpe V-Blocks No 750-2 machinist toolmakers tools c29

Brown and Sharpe V-Blocks No 750-2 machinist toolmakers tools c29

  • Reynoldsburg, Ohio, United States
  • Mar 3rd
V-Block V Block punch and die machinist toolmakers tools c27

V-Block V Block punch and die machinist toolmakers tools c27

  • Reynoldsburg, Ohio, United States
  • Mar 3rd
ROTARY TABLE, GRINDING FIXTURE, MOTORIZED WITH SINE PLATE, moto-grind

ROTARY TABLE, GRINDING FIXTURE, MOTORIZED WITH SINE PLATE, moto-grind

  • Homewood, Illinois, United States
  • Mar 4th
PALMGREN Cross Slide Rotary Table

PALMGREN Cross Slide Rotary Table

  • Lansing, Illinois, United States
  • Mar 5th
Enco LS-88" precision horizontal rotary table

Enco LS-88" precision horizontal rotary table

  • Sapulpa, Oklahoma, United States
  • Mar 5th
5C collet holder fixture w/ 5C 3/8" collet

5C collet holder fixture w/ 5C 3/8" collet

  • Montebello, California, United States
  • Mar 8th
USED QUICK CHANGE NMTB-50 TAPER TG-100 COLLET CHUCK NMTB50 TG100 QC-50

USED QUICK CHANGE NMTB-50 TAPER TG-100 COLLET CHUCK NMTB50 TG100 QC-50

  • Fairfield, Iowa, United States
  • Mar 9th
Harding Sjogren Chuck NO2 - D6

Harding Sjogren Chuck NO2 - D6

  • Demorest, Georgia, United States
  • Mar 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies