This auction is for a new Johnson Control on/off electric spring return Actuator. Model number M9220-BGC-3 Please make sure this is what you need prior to bidding. Don't miss out.
Power supply 24 VAC ± 20% 50/60 Hz 24 VDC ± 10% Power consumption 1.5 W (0.4 W) Transformer sizing 3 VA (Class 2 power source) Electrical connection 3 ft, 18 GA plenum rated cable 1/2” conduit connector protected NEMA 2 (IP54) 3 ft [1m] 10 ft [3m] 16 ft [5m] Overload protection electronic throughout 0 to 95° rotation Operating range Y 2 to 10 VDC, 4 to 20 mA Input impedance 100 k? (0.1 mA), 500 ? Feedback output U 2 to 10 VDC (max 0.5 mA) Angle of rotation max.
Belimo LMB24-3 Damper Actuator: Non-Spring Return; On/Off/ Floating Point Control Damper Actuator; Direct Coupled; 24 VAC/DC with NO Auxillary Switch; 45 in/lbs Torque. New in the box. It is your responsibility to know if this will work for your application.
Honeywell V8043F1051 is a 1" sweat connection two-way on-off low voltage motorized zone valve with screw terminal block electrical connections. It consists of an actuator and valve assembly for controlling the flow of hot water. And designed for cycling (not constantly powered on) applications.
Description for Honeywell V8043E1012 Honeywell V8043E1012 is a 3/4" Sweat Connection Motorized two-way on-off low voltage Zone Valve. Honeywell Zone Valves V8043 consists of an actuator and valve assembly for controlling the flow of hot water.
HONEYWELL V8044E1011 Overview On-off and diverting low voltage valves consist of an actuator and valve assembly for controlling the flow of hot water. Features Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored. All models may be installed without disassembling the valve.
Johnson Controls Actuator D-3073-2. This is a pneumatic damper actuator that operates at 8-13 PSI spring. The item comes with everything included in the picture.
HONEYWELL VALVE ACTUATORS for FAN Coil ***SPECIFY MODEL WHEN ORDERING VU444A1155 - 120V NO NICKEL PLATED VU844A1087 -24V VU843A1060 -24V VC8111 - 24V VC4011 - 120V VALVES AVAILABLE FOR ALL MODELS ********OTHER MODELS AVAILABLE******* VU MODELS Overview The humidity resistant, Fan Coil Valve Actuators are used in conjunction with VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HVAC equipment such as fan coil units, terminal reheat coils and convectors.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.