1031S - 1/2" The 1031S is equipped with a small protection screen to guard against dirt in the steam system. It is a more economical alternative than the 1041 which has a full-port strainer. Specifically designed for use in laundries.
We offer 1pcs. new steam trap for indusrial needs. Manufacturer: SAMSON Model: GTW-35 Size: 1/2 Type: 13E Flow: 0.01-10 bar Max.temperature: 200C For additional information, we have 26 pcs.
A new #1950 Barns & Jones cage unit For Durham 1/2 Series 1 (1a, 1b, 1c, 1d, 1e,) Steam Trap Interior. Complete one piece thermostatic trap interior which combines element, plug & seal. Designed to replace all the working parts of traps listed.
RSES Refrigeration Service Engineers SocietyHeating Training Course Term 1 course materialThis is a used binder of the material for Heating Term 1Plus Heating Boilers & Domestic Hot Water/Raypak service Manual booklet(Raypak booklet is wrinkled as if it has been wet, but print is legible) Information includes:Introduction to the Concept of HeatPrinciples of Heating
New/Old Stock/Unused IN Sealed Original Factory Packaging Spirax Sarco Model 1440180 Main Valve Assembly with Float for 1/2"-3/4" FT14 Trap Spirax-Sarco float mechanism with float for 1/2" and 3/4" FT-14-10, 145 pound pressure, F&T traps. Float mechanisms allow condensate to drain from the trap. The mechanism is a lever and seat operation an
*Lightly used SPIRAX SARCO 3/4" TD52 THERMO DYNAMIC steam trap 600PSIG *Used temporarily-approximately 16 hours This steam trap is lightly used. I thoroughly cleaned, inspected and tested this steam trap. It is in perfect working condition.
Set of four brand new in the box Armstrong TA4200 steam trap alerts These are for series 800 inverted bucket steam traps, good up to 600 psi. You are getting two boxes of two each for a total of four units.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
