steel pulley for sale, brand-new and used.

here is a LOT of 16 TAPS,, they range from 1/4-20 to 5/8-11 , 4 -bentley 5/8-11 new,, 1 -1/2-13 hy-pro nc gh3 new,, 3-3/8-16 hy pro gh3, 2 new ,1 used ,, 1-m18-1.0 new,,2-5/16-18 gh3 hy-pro new,, 2-ub 1/4-20 plug taps new,1-5/16-18 unc 2b druck-s EMUG new,,1-3/8-16 pulley tap 6 "oal MORSE new,,1-1/2-13 4 flt 8 " oal pulley tap new

CONDITION = NEW MANUFACTURER = NEW YORK TWIST DRILL BATH TAP {USA} TAP STYLE = BOTTOM (= 1-2 THREAD LEAD) MATERIAL = HIGH SPEED STEEL TAP DIAMETER AND PITCH = 5/16-18 TAP OVERALL LENGTH = 5" NUMBER OF FLUTES = 3 TAP H LIMIT = GH3 FLUTE STYLE =45 DEGREE SPIRAL /RIGHT HAND CU

CONDITION = NEW MANUFACTURER = NATIONAL TWIST DRILL {USA} TAP STYLE = PLUG (= 3-5 THREAD LEAD) MATERIAL = HIGH SPEED STEEL TAP DIAMETER AND PITCH = 1/4-20 TAP OVERALL LENGTH = 6" NUMBER OF FLUTES = 4 TAP H LIMIT = GH3 FLUTE STYLE =PLUG /RIGHT HAND CUT YOUR COST = $7.80

CONDITION = NEW MANUFACTURER = NEW YORK TWIST DRILL BATH TAP {USA} THIS ITEM IS MARKED ON SHANK CI {CAST IRON} TAP STYLE = PLUG (= 3-5 THREAD LEAD) MATERIAL = HIGH SPEED STEEL TAP DIAMETER AND PITCH = 1/4-20 TAP OVERALL LENGTH = 6" NUMBER OF FLUTES = 4 TAP H LIMIT = GH1

GTD PULLEY TAP 5/8-11 THREAD LIMIT: H3 NUMBER OF FLUTES: 4 CHAMFER: PLUG THREAD STANDARD: UNC MATERIAL: HIGH SPEED STEEL

Here we have QTY.1 of a Nice sharp used Extra Length RIGHT HAND Tap. Overall Length is 12" Manufacturer is unknown Shank size is 1.375" Diameter round This is a tap holder, you can take this tap out, looks like you need to push out a round pin that goes through the side of the holder and I am sure it also goes through the tap shank, might even be a taper pin. It is a 6 Flute Taper TAP, similar to a plug tap High speed steel hs hss

Here we have QTY.1 of a Nice sharp used Extra Length RIGHT HAND Tap. Overall Length is 12" Made in the US America by Wood & Spencer Shank size is 1.230" Diameter round with a .924" square drive I do not see any chipped teeth It is a 6 Flute TAP NF HS-G E High speed steel hs hss

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

DUMORE SERIES 28 DRILL-N-TAP DRILL HEAD Includes the Drill Head and column Tested and working As Pictured Please contact me for shipping Dumore Series 28 automatic feed drills and tappers, or self feed drills and tapping units, are cabable of both drilling and tapping. The motor automatically reverses for withdrawal after tapping. No mechanical parts – gears, clutches or lead screws – are required, eliminating the major cause of problems in ordinary tapping machines.

This is a group of assorted parts from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. Has wear and tear dust and dirt and rust and pitting but in good working condition. Local Pick-up Available.

STEEL MACHINED PULLEY TYPE  A BELT HEAVY DUTY 23/4 INCH DIAMETER   21/2 INCH LONG 3/4 INCH BORE HOLE IN VERY GOOD CONDITION