steel shoulder washer for sale, brand-new and used.

YOU WILL RECIEVE ONE ANCHOR The Wej-It PD58 POWER-Drop internally threaded drop-in anchor includes a wedge mechanism to create a secure hold within solid masonry and solid uncracked concrete, and meets 2000 International Building Code and 2000 International Residential Code specifications. The anchor body and wedge clip are made of corrosion-resistant zinc-plated on steel. The wedge clip expands within the drilled hole to secure the anchor in place.

(CS-800-203) 8-16x1-1/4" Plastite-Style 48-2 Hex Washer Shoulder TFS INCLUDES: 100 Pieces Brand: Blue Chip Fasteners Type: Unslotted Hex Washer Style: Plastite Style 48-2 Trilobular Thread Rolling Screw Thread: 8-16 Thread Length: 1" Shoulder Diameter: .241" Shoulder Length: .25" Total Length: 1-4/4" Material/Finish: 10B21/1022 Steel Case Hardened-.00015/ Zinc Yellow Available stock is approximately 10,000 Pieces, price discount on volume ordering.

May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (x1.5" thread length), steel, 1/4-20 drawbar, RH threads + nut and washer

May be used as a spindle-adapter for a wood lathe from LatheCity Morse Taper #3 two in one

Features: Thin Kerf (2.5mm) - Easy to feed through the workpiece with less material waste. Also allows cutting of thicker material. Anti-Kickback - New shoulder design for additional safety, reduces dangerous kickbacks.

For sale here is a brand new set of machined 304 stainless steel tubing spouts. These spouts are made for a 5/16" tap hole as well as for connecting 5/16" tubing to them to be used with any gravity or vacuum system as well as with a drop line for adding a second tap into a bucket or a sap sack. They are machined from 304 stainless steel and have a solid shoulder machined into the spout shaft with a holding washer (also 304 stainless) that is pressed on from the back side.

For sale here is a set of 20 brand new 5/16" diameter stainless steel maple sap / syrup spouts / spiles that are made to use with buckets. They are machined from 304 stainless steel and have a holding washer (also 304 stainless) that is pressed onto the spout from the back side up to a shoulder that is machined into the spout shaft for a solid holding ring.

24 bolts nuts and washers. 1 1/4" shoulder.