switch fittings for sale, brand-new and used.

SPECIFICATION

C14500 Tellurium Copper Rod 4" DIA x 12" L Tellurium Copper Applications

Nidek IM11 Wafer Auto Loader with Baseplate Features: Sequential or Random wafer selection Wafer sizes: 3, 4, 5, and 6 inch Dimensions: Weight without baseplate: 54.45 pounds (24.7 kg) and with baseplate 85.75 pounds (38.9kg). Weights are before packing. Baseplate: 23" x 25"x 3" Requires: 115VAC, 5A, and Vacuum for operation This was part of a wafer inspection station that was purchased from a well known semiconductor manufacturer's cleanroom.

OXFORD PLASMALAB 300 RIE / PE ETCHER SYSTEM consisting of: - Model: 300 RIE / PE (Reactive Ion Etch/Physical Etch) - Up to 12"/300mm Wafer Capable - Setup to etch SiO2, Nitrides, or Polymers - Platen: 380mm diameter - Adixen ATH 400HPC Turbo Pump - HP Computer with Pentium Dual Core Processor - Advanced Energy RFG 1251 RF generator (13.56MHz) - Plasma mode: RIE/PE recipe controlled - Wafer stage temperature control: Neslab RTE-7 chiller - Gas Box: 6 gas Lines - Gas Box with

This is a custom Iwaki Pump controller. We do not have the schematics or information on the electrical connector. If you are buying this for parts, we have two units available for parts.

Mounting plate is raw steel, NOT PAINTED! NOTE: COIL AND COIL CLAMP NOT INCLUDED, PICTURE IS FOR DEMONSTRATION ONLY. This is an oil filter upgrade for Lincoln Sa-200 welders WITH COILS .

NOTE: COIL AND COIL CLAMP IN PICTURE (FOR DEMONSTRATION ONLY) AND IS NOT INCLUDED, ALL OTHER ITEMS IN FIRST PICTURE ARE! This is an oil filter and fan powered oil cooler upgrade kit for Lincoln Sa-200 welders with F-162 or F-163 WITH COIL OR MAGNETO.

This is an oil filter upgrade for Lincoln Sa-200 welders. This is MADE IN THE USA! with a Derale dual in & out oil filter adapter, 1 quart K&N oil filter with common 3/4"-16 threads, Parker push Lok HIGH TEMP hoses with crimped collars to make it 110%, quality brass fittings and hardware.

THESE ARE SET UP FOR DISTRIBUTOR OR DIESEL ENGINES, BUT I FIGURED OUT HOW TO MAKE IT WORK WITH A MAGNETO!

Lamello Zeta P2 with Carbide Cutter, Drill Jig & Bit - No. 101402 The new Zeta P2 machine for the evolving P-System will save you time everyday! The P-System depth adjuster allows you to easily choose between five P-System depths.

Lamello Zeta P2 with Carbide Cutter, Drill Jig & Bit - No. 101402 The new Zeta P2 machine for the evolving P-System will save you time everyday! The P-System depth adjuster allows you to easily choose between five P-System depths.

For sale is a running and well maintained Powermatic 221 20" Planer. It can surface boards up to 20 inches wide and 8 inches tall. Motor is a 3 phase 5 HP Baldor, and it runs strong.

This unit cuts 2.5" deep with 9" saw, cross cuts 15" wide on 1" stock and rips to center of 48" wide panels. Excellent condition. The item is a bit dusty from storage, but has been used only sparingly over the years.

???? 1 ???? 2 ????

???? 2 ???? 2 ????

???? 1 ???? 2 ????