NEW JB Just Better #275 45 Degree Swaging/Flaring Tool Kit This tool kit is brand new and has never been used but the case has been stored in a tool box and is a little worn. JB #275 swaging/flaring tool kit. For producing flares 1/8", 3/16", 1/4", 5/16, 3/8", 7/16", 1/2", 5/8", and 3/4" OD.
NEW OPEN BOX Product Description Amazon.ca Product Description The Modular GearBox offers versatile and accessible storage for a variety of sizes and shapes of garage gear. The adjustable shelf with cushioned liner rides on full-extension ball bearing slides for smooth operation. The Modular GearBox is at home docked under one of the Modular Workbenches or off by itself serving as an additional work surface or tool stand.
Used- Swivel/Tilt Angle Plate (CAST IRON) Solid! Swivels 360 Degrees. No Company Marking, Just A Number 825-54 Top Plate H= 2-7/8" W= 5-1/4" L= 7-1/2" Bottom Plate H= 2.00" W=5-1/4" L= 9-1/16" Overall Height = 4-7/8" Swivel Diameter = 5-1/8" Has T-Slots(Width= .665") For Bolting Top & Bottom Plate Together, But You Will Need Nuts For 1/4-20 Threaded Rods or Screws, To Conjoin Together.
Set of Four 4" X 1" Casters 2 Locking Swivel 2 Rigid Black Rubber Wheels NEW Here is a Set of Four 4" X 1" Casters. They are new and are guaranteed to be in fine working order and NEW cosmetic condition with no sign
5" x 2". Kennedy roll away wheels, these are brand new as I put a different set on my tool box , two swivels with locks and two straight . Comes with bolts an nuts.
The flexible gravity roller conveyor is a very versatile piece of equipment that can expand up to 4 times its collapsed length. This is the perfect gravity conveyor for smaller or odd shaped packages and bagged goods that are heading in or out of a facility.
FREE SHIPPING TO THE LOWER 48! Fixture Plates: All plates are 1.375" thick, dual layer aluminum fabrications, anodized for surface toughness. Laser engraved reference scales provide 1/8" increments
I am parting out a Craftsman 109.20630 metal lathe I recently purchased and this C3509 Carriage Saddle Assembly ,with 1/2 nuts,feed lever, feed ball along with the Swivel base feed screw ,ball crank handle and mounting hardware are up for sale.
591203 Features: -Dielectric ball valve with isolation flange.-Dielectric isolation = no galvanic (dissimilar metal) corrosion.-Eliminate dissimilar metal corrosion.-Quick installation.-Full port shut-off ball valve.-Service pump without draining system.-Swivel flange allows optimum pump mounting position. Dimensions: -Dimensions: 4.25'' H x 2.5'' W x 4.25'' DGrundfos dielectric ball valves eliminate dissimilar metal corrosion.Packed 2 per box with Gasket and Bolts & Nuts
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
