the cable building for sale, brand-new and used.

(800) 967-7217Visit Our Store

&

&

&

(800) 967-7217

Features: CAT6, CAT5e and CAT5 compatibility GR-1089 Intra-Building rated Cable shield isolated from safety ground IEEE 802.11af/at Power-Over-Ethernet (PoE) compatible Weatherproof ABS enclosure with gasketed cover and shielded RJ45 jacks

Digital Moisture Meter Tester Wood Sawdust Soil Tobacco

Digital Moisture Meter Tester Wood Sawdust Soil Tobacco

VistaView CableTec (VVC) Stainless Steel SwiftCatch for 3/16" 1x19 Cable The VVC SwiftCatch provides a fast connector end for a cable railing run. 3/16" cable is inserted into the fitting and automatically catches, holding the cable firmly in place. The SwiftCatches are not tensioners as they must be anchored before the other end of your cable run is tensioned.

VistaView CableTec (VVC) Stainless Steel Stemball Swage with Gray Cap for 1/8" Cable The VVC Stemball Swage provide a "dead end" for a cable run. Plastic gray cap and 2 x stainless washers are included. The cap snaps directly onto the washers and provide a nice, decorative end to a run.

VistaView CableTec Stainless Steel Angled Washers for 1/8" and 3/16" Terminals The VistaView Angled Washers are to be used whenever a cable run is terminated on an angle using a threaded terminal. The washer is used on the outside of the post to help receive the terminal on an angle and is good for the VistaView Threaded Terminals in 1/8" and 3/16" sizes (short and long). The cap is placed on the outside of the beveled washer.

VistaView CableTec (VVC) Stainless Steel QuickConnect Threaded Terminal for 3/16" Cable The VVC QuickConnect Threaded Terminals provide easily installed tensioning for your cables and is typically housed entirely within your end posts. Threaded Terminals are the most traditional way of installing a cable railing and are typically paired with a second Terminal, SwiftCatch, Deck Toggle or Lag Stud.