threaded aluminum rod for sale, brand-new and used.

3 NEW BIMBA 2 1/2

Feature MAL 16 x 25 model, aluminum alloy body, double action, long service life, easy to maintain and operate. This Mini Air Cylinder is wildly used in machinery industry.

This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.

New billet aluminum replacement rear clamp block for your Delta Unisaw fence This is a replacement clamp block for the rear of the early style Unisaw fence. The early style fence is shown in photo #2. This fence is identified by the presence of the small rear clamp tighening knob above the lever lock at the operator side

20mm Bore 75mm Stroke Aluminum Alloy Pneumatic Mini Air Cylinder Product Name : Air Cylinder; Model : MAL20-75; Action Type : Double Acting Working Fluid : Air; Bore : 20mm/0.79''; Stroke : 75mm/3'' Max.Press : 1.0 Mpa; Rod Thread Diameter : 7.9mm/0.3''; Piston Rod Diamet

Screwed Piston Rod MAL 20 x 50 Dual Action Mini Air Cylinder Product Name : Air Cylinder; Model : MAL 20 x 50; Action Type : Double Action Working Fluid : Air; Bore : 20mm; Stroke : 50mm Max.Press : 1.0Mpa (10.2Kgf/cm?); Screwed Rod Diameter : 7.5mm; Threaded Flat

This pack included two Fully Threaded Rods, two Linear Motion Shaft, a Universal Joint and a Thread Drive Beam. This pack included two Fully Threaded Rods, two Linear Motion Shaft, a Universal Joint and a Thread Drive Beam.(Other beams and the motor in the first picture are NOT included.)

SquareTrade © AP6.0 SMC 8" STROKE STAINLESS AIR CYLINDERS CDM2RA20-200 This is an Auction for a Stainless Steel Double Acting Pneumatic Air Cylinder with Built in magnet, No. CDM2RA20-200. Cylinder has 8 inches (200mm) of stroke and a 20mm bore, piston measures 8mm .314 d

BIMBA MRS-041-DXDE AIR CYLINDER In Original Packaging 1" Stroke, Double Acting, Double End, 1/8" NPT Threaded Ports, 304 Stainless Steel Body, Anodized Aluminum End Plates, 1/2"-20 Mounting Threads at Both Ends, 5/16" diameter Stainless Piston Rod with 1/4"-28 Threaded Ends, Length Dimensions Available @

BIMBA FLAT 1 AIR CYLINDER FO-040.5 1/2" Stroke, Double Acting, Single End, 10-32 Threaded Ports, 304 Stainless Steel Body, Anodized Aluminum End Plates, Counterbored Mounting Holes at Both Ends, 5/16" diameter Stainless Piston Rod, Exact Dimensions Available @

BIMBA FLAT 1 AIR CYLINDER FO-040.125 1/8" Stroke, Double Acting, Single End, 10-32 Threaded Ports, 304 Stainless Steel Body, Anodized Aluminum End Plates, Counterbored Mounting Holes at Both Ends, 5/16" diameter Stainless Piston Rod, Exact Dimensions Available @

UP TO 2 BIMBA 1" DOUBLE END AIR CYLINDERS FSD-041-M You are bidding on up to 2 Pneumatic Bimba Double Acting, Double End Magnetic Sensing Pancake Air Cylindesr with rear and front Threaded mounting holes, Model # FSD-041-M with 1 Inch of stroke, 3/4" Bore, and a 5/16" piston. Magnetic Sensing Body - 304 Stainless Steel Heads - Anodized Aluminum Alloy Piston Rod - Ground and Polished 303 Stainless Steel Piston Seals - Buna N Rod Bushing - Oil Impregnated Bronze Rod Seals - Buna N O-

ARO 2" STROKE STAINLESS AIR CYLINDERS 2418-5089-020 You are bidding on a Stainless Steel piston rod Double Acting Pneumatic Air Cylinders, No. 2418-5089-020 with 2 inches of stroke and a 1 1/8" bore, piston measures 3/8" diameter. Economair round cylinders are medium to heavy-duty units that can be installed anywhere that a repairable cylinder is desired.

NEW BIMBA 2" STROKE DOUBLE WALL AIR CYLINDER 2" BORE DW-312-2 This is a Brand New Pneumatic Bimba Double Acting Double Wall with 2 inches of stroke 5/8" piston threaded on the end, Model DW-312-2. FEATURES Tie Tube: Epoxy coated Aluminum Cylinder Body: Smooth 304 stainless steel Piston Rod: Hard Chrome Plated Pressure Rating: 200 psi Life: 1400 miles of travel when lubricated For more information see: http://www.bimba.com/Global/Library/Catalogs/Bimba%20Catalogs/FL_DoubleWallRSS.p

new bimba EDM-25-300-C 25mm bore, 300mm stroke length, double end 10mm male threaded rod, adjustable cushions, magnetic piston

UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-

FOR SALE: ONE SET OF TWO ALUMINUM 6061 MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.75" LONG, .750" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

FOR SALE: ONE SET OF TWO SOLID BRASS MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.875" LONG, .875" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

Aluminum Rod 24" x 2" Dia. 6061-T6511 Temper-Heat Treated. Listed as used because one end has a threaded stud which has a thread depth of less than 1".