threaded aluminum for sale, brand-new and used.

FOR SALE: ONE SET OF TWO ALUMINUM 6061 MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.75" LONG, .750" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

FOR SALE: ONE SET OF TWO SOLID BRASS MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.875" LONG, .875" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

toolscarsrus

toolscarsrus

Up for auction is a slightly used Mill/ Drill X Y table, the table measures 10" x 6" and has a 3 T-slots. Also included is an aluminum tooling plate for the table. The hole pattern is 3/4" x 3/4"(1/4-20 threaded holes).

Vacuum Clamping Table VTZ4824 Size is 48inches by 24inches Four Sections Will Cover Typical 4ftx8ft CNC Router Table Includes clamping mats

This is a newly machined 47/37 transposing gear set which converts your 8 TPI lead screw to a 2.5 mm pitch. The thread’s crest-to-crest or lead error is only 0.02% or about 0.0025 inch for a one-foot long threaded rod. The transposing gears are under 3 inches in diameter leaving lots of room for closing the gear cover.

Note:The first two photos showing the moving jaws are not correct. The moving jaw that comes with this set does not have the 4 vertical "T" slots shown. ************************************** Original Price Of This Angle Jaw Set Was $329-Until The New Configuration &nb

ebay money back policy applies Any machine shop own

(one) Hydraulic filter strainer , 3" x 8" , Masuda MSA-C75T , heavy duty aluminum threaded cap . Unused . $15 shipping in the continental US You can send text messages to my cellphone at 9374165497@vtext.com D-11746 If you have any questions, please email me!

This auction is for one piece: Altech FS2 U1/U1 51.201R 10A 500V Foot Switch _______________________________________________________________________________________________________________

This is a flowmeter that was in good working order when removed, this is your chance to get a high dollar product at a low price!! Here is the link to the specifics on the flowmeter. Standard Features Two Floats per Tube (Standard) expand range of flowmeter.

Vacuum Research 94577-101 VITON Ultra High Vacuum Gate Valve ISO 180 Flange

Welcome to BE Quality Industrial. Most items are purchased from Nuclear Power Plants and all are of the absolute highest standards and quality. You are buying the best of the best for a fraction of the cost.

Main purpose : This model capping machine is mainly used for a variety of screw cap is unscrewed or tightened.