threaded clamp for sale, brand-new and used.

Proto J4-HDL 0 To 4-5/8 Extra Heavy Service C-Clamp

Special offering of 4 complete sets of this item . 304244 24" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 24" travel acme threaded rod ( 26.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

NEW ENERPAC 2000 lb SWING CYLINDER STRS-121 This is an Auction for a Brand New in the Box, Enerpac Double Acting Swing Cylinder, Model STRS-121. Enerpac threaded body model swing cylinders can be threaded directly into fixture, can be secured at any height Body thread for precise swing cylinder height positioning Threaded port connection Easy installation and removal Greatest flexibility in fixture design Hydraulic clamping force Specifications: Clamping force - 2400 lbs.

Double-Acting push/pull hydraulic Threaded-Body Cylinder with plunger head Bolt Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the work piece surface irregularities,also deflection and vibration under machining loads.&nb

Carr Lane Roemheld Hydraulic Swing Clamp Part #: CLR-1895-221 BRAND NEW IN BOX being sold by a 100% positive feedback & smoke-free seller! Buy with confidence! You are bidding on a brand new in box

var itemNumber = window.ebayItemID ?

Vintage and used but in excellent condition. All edges and corners are sharp and undented. There is 3/4" capacity for round stock with the clamp screwed in place.

6 HDL PROTO EXTRA HEAVY DUTY C-CLAMP 0-6-5/8"

Enerpac Swing-Clamp Cylinder,RWL-300,NEW Enerpac Part Number RWL-300 Single - Acting, Spring-Return, Swing-Clamp Hydraulic Cylinder Condition : NEW - unused . Cylinder Capacity: 10,000 Lbs @ Max. PSI Left hand arm swing, Hydraulic Stroke 1.50" Total ( 0.35" Clamping ) Retracted Height 9.50" Cylinder Bore Diameter 2.13" Cylinder Effective area 2.0

Enerpac Swing Clamp Clamping Cylinder WWR - 5 Enerpac Part Number WWR-5 1/2 Ton Capacity Similar to Enerpac Part Number WWR-50 Double - Acting, Hydraulic-Return, Swing-Clamp Hydraulic Cylinder Condition : NEW - unused . Cylinder Capacity: 1,000 Lbs straight pull @ Max PSI Right hand arm swing, Max Operating Pressure 3800 PSI

Enerpac Swing Clamp Clamping Cylinder RWR - 30 Enerpac Part Number RWR-30 (Similar to RWR-300) Single - Acting, Spring-Return, Swing-Clamp Hydraulic Cylinder Condition : NEW - unused . Cylinder Capacity: 10,000 Lbs straight pull @ Max PSI Right hand arm swing, Hydraulic Stroke 1.50" Total (

Enerpac Swing Clamp Clamping Cylinder RWR - 11 - V Enerpac Part Number RWR-11-V (Viton Seals) Similar to Part Number WWR-100-V Double - Acting, Hydraulic-Return, Swing-Clamp Hydraulic Cylinder Condition : NEW - unused . Cylinder Capacity: 2,000 Lbs straight pull @ Max PSI 1.19" Stroke,

Enerpac Swing-Clamp Cylinder RWR - 300 NEW Enerpac Part Number RWR-300 Single - Acting, Spring-Return, Swing-Clamp Hydraulic Cylinder Condition : NEW - unused . Cylinder Capacity: 10,000 Lbs @ Max. PSI Right hand arm swing, Hydraulic Stroke 1.50" Total ( 0.35" Clamping ) Retracted Height 9.50" Cylinder Bore Diameter 2.13" Cylinder Effective area

Enerpac Swing Clamp Clamping Cylinder RWL - 1 - V NEW Enerpac Part Number RWL-1-V ( Viton Seals ) Single - Acting, Spring-Return, Swing-Clamp Hydraulic Cylinder Condition : NEW - unused . Cylinder Capacity: 1 Ton Cylinder Capacity: 2,000 Lbs straight pull @ Max PSI 1-13/16" Stroke,

Latch clamp with a threaded U bolt for adjustability 3180 N holding capacity Steel, Zinc Plated

NEW Bessey 1800-S24 High Performance 24-Inch Medium Duty Bar Clamp

RACE CAR TUBING NOTCHER Made By Affordable Bender 100% Made in USA Simple to Use - The Affordable Bender Tube Notcher may be mounted in a drill press or simply clamped in a vise and used with a 1/2" hand drill. It can be mounted vertically to mount in your drill press or mill or horizontally to mount to your welding table. The 1/2" hand drill setup is by far the best in our opinion.