threaded flange for sale, brand-new and used.

Genuine U.S. Military Issue Surplus   Automatic Connector - Electrical Receptacle Connector - P/N:  RF-C8925-70 P/N:  RF-C8925-70 This item cross-references to the following.... Automatic Connector P/N: RF02279  Stromberg-Carlson Corp.

304242 12" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 12" travel acme threaded rod ( 14.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

304240 6" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 6" travel acme threaded rod ( 8.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

Special offering of 4 complete sets of this item . 304244 24" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 24" travel acme threaded rod ( 26.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

YOU ARE BIDDING ON A  LOT OF 25pcs MATRIX Circular MILITARY Spec Connector THREADED WALL MOUNT REC 4P SZ 14 . THESE ARE BRAND NEW IN SEALED PACKAGING. THEY DO COME WITH GOLD PINS AND INSERTION TOOL.

FOR SALE IS A HEAVY DUTY MALLEABLE IRON ADJUSTABLE I-BEAM CLAMP FOR 5/8” THREADED ROD. THESE OPEN TO AROUND 7 INCHES WIDE & LOAD RATING IS 1368lbs. Not only do these clamps get a secure grip on each side of the beam, they have an adjusting rod to accommodate a range of flange widths.

This listing is for 10 pcs. Zinc Plated Flange 8mm (12mm Hex) Bolts & Nuts M8 X 1.25 Metric Threaded Body Hardware Each bolt is 5/8" long (threaded length). Comes with 10x Bolts, 10x lock washers, 10x flat washers, 10x nuts These bolts and nuts require a 12mm wrench or socket to tighten.

You are bidding on 1 ea Jergens Part # 807281 and 1 ea McMaster-Carr Part # 94715A830. Both are new and unused but do not have packaging. Current new price for the lifting pin is $84.50 and the receptacle is $33.72 (plus shipping from two different vendors).

Lasco Brand Threaded Flange 852-040 Schedule 80, Class 150 Pipe flanges Threaded Flange Size: 4-inch Schedule 80 PVCs are thicker, stronger, will handle higher pressures, and endure colder climates than Schedule 40 PVCs Schedule 80 PVCs: not for Compressed Air or Gas; conforms to ASTM D 1785; fittings conform to ASTM D 2467; threaded fittings conform to ASTM D 2464

Up for sale is a Brand New Goulds WS1012BF Submersible Sewage Pump 1 HP 230 Volts 1 HP230 Volts1 Phase1750 RPM5.75" Impeller Diameter 12.3 Max Amps Up for sale is the Goulds WS_BF series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

Up for sale is a Brand New Goulds WS0512BHF Submersible Sewage Pump 1/2 HP 230 Volts 1/2 HP230 Volts1 Phase3500 RPM3.19" Impeller Diameter 7.6 Max Amps Up for sale is the Goulds WS_BHF series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

Goulds WS1512BHF Pump Sewage BHF Series Submersible 1-1/2 HP 230V Water Transfer Dewatering/Effluent Cast iron, enclosed, non-clog, dynamically balanced with pump out vanes for mechanical seal protection LAST ONE!!! This is the CHEAPEST price you will find on a genuine part. This is new, never used or installed.

NEW ENERPAC 2400lb SWING CYLINDER STLS121 This is an Auction for a Enerpac Single Acting Left Turning Swing Cylinder, Model STLS121. Enerpac threaded body swing cylinders are threaded directly into the fixture. The cylinder height is adjusted to the appropriate height, and then locked in place using a flange nut.

For your Consideration is a New SWAGELOK / WHITEY Full Bore Ball Valve 3/4" NPT Threaded NOS Model : SS-65TF12 3/4" threaded NPT Ball Valve # R46BG0574B Opening is .875" Highly Polished Interior Made in the USA

FOR SALE IS A HEAVY DUTY MALLEABLE IRON ADJUSTABLE I-BEAM CLAMP FOR 5/8” THREADED ROD. THESE OPEN TO AROUND 7 INCHES WIDE & LOAD RATING IS 1368lbs. Not only do these clamps get a secure grip on each side of the beam, they have an adjusting rod to accommodate a range of flange widths.

Genuine U.S.

[ Century USN1302 3 HP 208-230 V 60 Hz 3001-3600 RPM Pool Pump Motor