threaded post for sale, brand-new and used.

Genuine U.S. Military Issue Surplus   Nelson  Aero Space Inc. - Tube to Boss Aluminum Tee  P/N:  NER01823 This tee cross-references to...

Genuine U.S. Military Issue Surplus Threaded Hydraulic Swivel Joint / Elbow Fitting P/N: LSP56-57C6G

Genuine U.S. Military Issue Surplus   Parker-Hannifin Corp.

Genuine U.S.

Genuine U.S. Military Issue Surplus   Brass Quick Disconnect Hose Coupling   The only markings on the coupling is...   PAT  3,709,528 The overall size is 2 9/16" x 1" Outer Diameter The center hole of the quick disconnect is 1/2" x 1/2" Inner Diameter The threaded area on the one end is 5/8" x 5/16" Threaded Diameter Approximately 24 Threads per Inch The port on the opposite end of the quick disconnect is 3/16" Inner Diameter The quick disconnect hose coupling is made of brass.

VistaView CableTec Stainless Steel Angled Washers for 1/8" and 3/16" Terminals The VistaView Angled Washers are to be used whenever a cable run is terminated on an angle using a threaded terminal. The washer is used on the outside of the post to help receive the terminal on an angle and is good for the VistaView Threaded Terminals in 1/8" and 3/16" sizes (short and long). The cap is placed on the outside of the beveled washer.

Genuine U.S. Military Issue Surplus Aeroquip Threaded Brass Elbow Adapter P/N: 2089-4-4B NSN: 4730-01-026-7465 The inner threaded diameter of the female end is 1/2 ”. The outer threaded diameter of the male end is 1/2 ”.

Genuine U.S. Military Issue Surplus   Bronze Pressure Angle Valve On the top of valve is has... 100 NI There is a logo on the valve, it looks like...

Genuine U.S. Military Issue Surplus   DeLaval Inc. - Gem Sensors Div.

175+ Pc’s. Aircraft Threaded Drill Bits & Extensions + Regular Bits HSS I am listing these all as used but there are quite a few new ones (see Pic’s) . All Bits are 1/4"-28 THREADED DRILL BITS AIRCRAFT TOOLS & are H.S.S., All bits are sharp & ready for Use except the few in the upper LEFT hand corner (see Pic).

7-MACHINIST/TOOLMAKER Holddowns 5- with threaded Jack Screw Holes This is an assortment of small holddowns 5-Pc’s are steel & Two are Aluminum. Steel Pc’s have Threaded Jack screw holes for quick height adjustment.  Combine Wins & Save Shipping $$$$$. Have FUN BIDDING & GOOD LUCK “Check out my other items!”   Hi my name is David;        WHERE APPLICABLE I will COMBINE SALES  “Please E-Mail me & I will Hold your items until your done bidding” .

NEW 3D printer Smooth & Threaded Rods + Nuts Kit rework shaft Reprap Prusa i3 etc..

Genuine U.S. Military Issue Surplus   Purolator - Reusable Brass Fluid Filter Element Assembly P/N: 19002 This item cross-references to the following.... Arvinmeritor Inc.

Genuine U.S.

Genuine U.S. Military Issue Surplus   General Electric - Valve Lift Rod  for Turbine    GE P/N: 101C414BC 1 GE PN: 125D257AD G1   NSN: 2825-00-887-4714   The overall length is 10 1/2" The overall size of the  shaft is 8 3/4" x 9/16" Diameter The threaded end is 1 1/8" x 1/2" Threaded Diameter The end is 1/2" x 3" Diameter There are four holes in the end, they are 3/8" Inner Diameter There is a notch on the end, it is 3/8" x 3/8" Made of Steel Weight: 1 1/2 LBS. Unused!