threading nuts for sale, brand-new and used.

You are buying all the bits pictured(there may be more than 1 pic of the SAME bits) ** all checked** most never used after grinding** NO NO NO chips, nix or broken caribide ** Professionally ground with bias reliefs, chip breakers and chip shutes--real quality stuff --- complex professional designs -- crazy professional designs for grooving, threading etc etc etc USA Tool Bits Bonanza @ SEE ALL SETS

You are buying all the bits pictured(there may be more than 1 pic of the SAME bits) ** all checked** most never used after grinding** NO NO NO chips, nix or broken caribide ** Professionally ground with bias reliefs, chip breakers and chip shutes--real quality stuff --- complex professional designs -- crazy professional designs for grooving, threading etc etc etc USA Tool Bits Bonanza @ SEE ALL SETS

Used with very low hours. Bought new in late 2013. Very, very clean.

This appears to be an vintage Sargent & Co. No. 8 steel wing divider with a good snug brass and steel pivot joint.

This appears to be an early Peck, Stow & Wilcox No. 8 forged steel wing divider from East Berlin, Conn. with good snug brass and steel pivot joint.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

How to Run a Lathe: How to Erect, Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19, by O’BRIEN BROTHERS J.J. O’Brien and M.W.

BRAND NEW "TAKE OFF" CHUCK (TAKE OFF CHUCK IS A BRAND NEW CHUCK THAT WAS TAKEN OFF A NEW MACHINE BEFORE BEING USED) THIS CHUCK IS SIMILAR TO A KITAGAWA B24 NEW TAKE OFF CHUCK. IT IS A 3-JAW CHUCK WITH A 24" DIA. AND A 6.555" THRU HOLE.

Untitled Document Best Quality for Black Oxide Plated Tee Nuts Size

Untitled Document (10 Pcs) Black Oxide Plated Tee Nuts Size - M-16 T

Untitled Document Black Oxide Plated Tee Nuts M14 To Suit 16mm - Lot

Untitled Document 10x Tee Nuts M10 To Suit 12mm - Best Quality Nuts/

Untitled Document Black Oxide Plated Tee Nuts Size - M-16 To Suitabl

Quality products at affordable prices. Check out our

VERITAS 4 WAY SPEED FRAME CLAMP WITH EXTENSION RODS 475309 a.imagelink {color:#C9C9C9;} a:hover.imagelink {color:#C9C9C9;} a:visited.imagelink {color:#636363;} a.imagelink img.auctionimage {