thru bolt for sale, brand-new and used.

Crosby Lifting Swivel #HR125/106975 New in Box.15000# capacity1/1/4" mounting boltSwivel loop approx. 10" long Features Rated at 100% at 90 angle. 100% individually proof tested to 2-1/2 times the Working Load Limit with certification and Statistically Magnetic Particle inspected.

1/2"-13 SHORT T-SLOT BOLT ASSORTMENT SET Heavy Duty 4140 Steel

You are buying a used URYU UX T1620 AcraPulse 3/4" square drive reversible pneumatic oil pulse nut and bolt runner setter with automatic shutoff for 87-150 ft/lbs, 22.9 Max CFM @ 90 PSI. The rear slingpoint clevis is broken - see pic, but otherwise this tool is in good condition. This item ships free to the lower 48 states.

Accuvac CF12 inch,  knife edge flange bored for 10 inch tube, with through bolt holes.The manufacturer is ISO 9001-2008 registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10 to -13 Torr; Temperature Range 200 to 450 deg C.

1/2"-13 LONG T-SLOT BOLT ASSORTMENT SET - TE-CO Heavy Duty 4140 Steel

One brand new and never been used Hardinge boring bar tool holder, #: LC-11944-02C 1.25" I.D. hole thru x 3.5" long 1.89" O.D. at mounting area, 1.44" x 1.88" x 2.5" bolt-hole-pattern mounting center distances (8) set-screw pattern to hold tools Thru-coolant directional port Bolts & accessories Questions?

You are buying a true heavy duty grade 2 full size lever lock (not the fake 1/2 size versions you can find here for $25.00) and a grade 2 deadbolt that are keyed alike. If you are buying multiple sets of locksets they will be keyed alike in deadbolt and lever lock pairs but the sets will be keyed different. If you want multiple sets all keyed to the same key please send us a message after your purchase.

You are buying a Square D 30 Amp 3 Phase 600 Volt Fusible Disconnect NEMA 3R rated. This one looks to have never been installed but since there are two knockouts missing we'll call it used. Includes 3 20A FRS-R-20 fuses.

You are buying a Square D 100 Amp 3 Phase 600 Volt Fusible Disconnect NEMA 12 rated. Brand new still in the box Perfect size disconnect for service disconnect on temporary power construction applications or Industrial Application. Save $$$ here priced right here!!!

You are buying a Square D 100 Amp 3 Phase 240 Volt Fusible Disconnect NEMA 12 rated. This one looks to have never been installed but since it is scuffed up on the front we'll call it used. All knockouts present so it has never been wired.

Here’s Square D, AP-304-10, 400 Amp, 600 Volt, 3 Wire, 3 PH, Aluminum, I Line Busway / Bus Bar Duct This is I-Busway (enclosure is 3.5" wide) - NOT I-Line 2 Enclosure "Joining Plates" included - (2pc./length)

You are buying an Un-used Greenlee hydraulic cable cutter. MSRP over 1600 American dollars!!! Get it here for 600 dollars and use the savings on vacation!

Wire Stripping Machine Manuel Cable Stripper Tool Scrap Copper Recycling SharpenerB008I5QL0C Patented New Features--Only Available from TheCopperMine TM: Output Limiter: Separate copper&jacket when pulling the wire thru,all in 1 stroke. Double work speed Input Guide: Wire gets straightened and aligned automatically. Good for kinked or tangled wires.

You are buying a quantity of 175 CR383RK25 terminal blocks with end plates. Eaton Cutler-Hammer. New in Box.

All parts are new, and have never been installed. NO original Packaging. This is Cutler Hammer part number HM1R12.

You are buying 15 Rolls of Dymo Heat Shrink Sleeving Tube. These rolls are all yellow material. There are 5 Rolls of 1/4" Yellow PN# 18052, 5 Rolls of 3/8" Yellow PN# 18054, 5 Rolls of 1/2" Yellow PN# 18056 This is all new material still sealed in the plastic pouch.

You are buying a new Flow Meter. Brooks Instruments part number 1110-08D2G1B. NSN 6680-00-451-3752CJ NEW.