thru bolt for sale, brand-new and used.

BLACK BOLT WITH CENTER HOLE 1/2 By 1 inch long Complete total length 1-3/16Square Carriage Head With LockwasherNut

This auction is for 1 Schlage M204-198 thru-bolt boring jig. It is indispensable when drilling the holes for the thru-bolts on Schlage AL, D and ND series lever sets. Anyone upgrading from knobset to a leverset will want to own this jig.

12 Ton thru bolt style shackle just as you see it. Please see the photos as they are sometimes better at describing condition that I am and are of the actual item. Please check my feedback and bid with confidence.

Used, but in great shape. As seen by the paint inside the head this tool was barely used. Description L

This is a New WLL12T Shackle-1.25" Diameter-Thru Bolt Style-No Bolt Marked 1 1/4

For One Lot of 19 , New / old stock, Thomas & Betts Blackburn #BTC0614 Copper Offset Tang Lug Connectors. Single conductor lug for #6 Str thru 14 AWG copper wire. Comes with offset tang.

LOCTITE THREADLOCKER BLUE 242 NUT & BOLT LOCKER 6 ml Shipping

Grade 5 SAE bolt set with nuts, lock washers, and some flat washers. Sizes 5/16-18, 3/8-16, 7/16-14, 1/2-13, and 5/8-11. Lengths range from 1 inch to 3.5 inch.

. ANCHORS

Extremely large bolt cutters. Almost 43 inches long and weighs 18 pounds. Opens and closes smoothly.

You are bidding on (4) Dixon Hose Clamps # 769 which is a double bolt clamp w/saddles and fits hose with OD from 6 32/64" to 7 36/64". They are NOS (never used) and are plated however some of the plating has faded from being shelf worn. Please ask any questions before bidding as all sales are final.

42 frame 1 speed 1075 RPM All-angle mounting TEAO enclosure Diameter: 5"; HP: 1/4-1/6; Volts: 208-230; RPM: 1075; Speeds: 1; F/L Amps: 2.00; Efficiency: 65.0%; Shaft Diam.: 1/2"; Shaft Length: 3"; Rot.: Rev.; Bearing Type: Dbl-Sld Ball; Wt. Lbs.: 12.0; Capacitor to Match: G21-933; NEMA Frame: 42; Type: PSC; Phase: Single;

THIS AUCTION IS FOR A NEW OLD STOCK KITAGAWA 8" BB08 CNC LATHE SUPER LARGE BORE POWER CHUCK with A2-6 MOUNT. 2.600 THRU HOLE. 5.250 BOLT CIRCLE (6 bolts x M12) MASTER JAW SERRATION 1.5mm x 60° JAW T NUT SIZE (top .551 x bottom .855) DRAW TUBE SIZE 74MM X 2.0MM THREAD I bought several crates of surplus tooling from a machine shop.

  BIN 444 Up for auction is this set of new 3/8"-16 universal bolt dies. Unused in worn package. Good used tool. If you have any questions please ask. Check my other

  BIN 444 Up for auction is this set of new 1/2"-13 universal bolt dies. Unused in worn package. Good used tool. If you have any questions please ask. Check my other